Cart 2 india

Specification
AutoPartPosition : outside
Brand : Motoforti
BulletPoint1 : Universal Fit: Suitable for most car.
BulletPoint2 : Advantage: Replacement for your broken hot melt glue sticks, resolving any issues and bringing your car performance back to normal.
BulletPoint3 : Product Characteristics: Made of resin material, it's built to endure daily use and wear, providing long-lasting performance.
BulletPoint4 : How to Install: Direct replace or ask for professional support if needed, it's convenient to use.
BulletPoint5 : What You Get: 20 Pcs Hot Melt Glue Sticks
Color : Yellow
ExternallyAssignedProductIdentifier1 : 0788166649812
ExternallyAssignedProductIdentifier2 : 788166649812
FitType : Universal
IncludedComponents : 1pcs * Dent repair puller  1 pair * Large base  28pcs * Glue puller tabs  1pcs * Flat hole equipment
ItemName : Motoforti Universal Hot Melt Glue Sticks, 7mm x 20Cm, Resin, Yellow, 20 Pcs
ItemPackageDimensions_Height : 0.51 inches
ItemPackageDimensions_Length : 7.87 inches
ItemPackageDimensions_Width : 7.87 inches
ItemPackageQuantity : 20
ItemTypeKeyword : automotive-collision-repair-sets
Manufacturer : Motoforti
Material : Resin
ModelName : dent remover tool for car
ModelNumber : SDF12
NumberOfItems : 1
PartNumber : fmoto240426001243
ProductDescription : Universal Fit for most car
Product Details:
Stick size: 7mm x 200mm /0.28" x 7.87"(Diameter*Length)
Softening Point: 100°C
Total Length：200mm/7.87"

Advantage:
Advanced, practical ,stability and strong viscosity design of this glue adhesive stick.
This practical glue stick use in high temperature glue gun(not included).
Great for car paintless dent repair and more.

How to Use?
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Kindly Notes: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.
Kindly Notes:
①This is non-OEM product, accessory ONLY!

Package Content:
20 pcs Yellow Hot Melt Glue Sticks


ProductSiteLaunchDate : 2024-05-12T10:32:06.868Z
Size : 7mm*20cm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 31201600
WarrantyDescription : Three months