Cart 2 india

Specification
AutoPartPosition : inner
Brand : REPAIROCK
BulletPoint1 : Fitting: Stick Size: 11mm x 270mm /0.43" x 10.63"(Length*Diameter); Softening Point: 100℃
BulletPoint2 : Benefit: Design for repairing car dent, has very strong adhension and low melting point, if you want to repair car dent, that is your choice.
BulletPoint3 : Features: Black glue stick is suit for relatively soft car surface.
BulletPoint4 : Useful: Easy to clean,you should use the wet cloth and alcohol to clean the glue as soon as possible after repairing the dent.
BulletPoint5 : Detail: Glue stick is the standard size, suit for all standard glue gun.
Color : Yellow
FitType : Universal
ItemName : REPAIROCK 20 Pcs 11mm x 270mm Hot Glue Sticks Auto Body Paintless Dent Removal Repair Yellow for Car Auto Replacement Parts
ItemPackageDimensions_Height : 1.77 inches
ItemPackageDimensions_Length : 11.02 inches
ItemPackageDimensions_Width : 4.33 inches
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-collision-repair-sets
Manufacturer : REPAIROCK
Material : Resin
PartNumber : kc240910000244for
ProductDescription : Specifications:
Stick size: 11mm x 270mm /0.43" x 10.63"(Length*Diameter)
Softening Point: 100°C
Total Length:270mm/10.63"

Description:
Advanced, practical ,stability and strong viscosity design of this glue adhesive stick.
This practical glue stick use in high temperature glue gun(not included).
Great for car paintless dent repair and more.

How to Use?
1.Clean the dent with a clean wet cloth;
2.Mount the glue stick into the glue gun,pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes;
3.Use a proper drawing gasket. Large dent requires a large drawing gasket. (Note: The larger the drawing gasket is, the larger the drawing force is);
4. Pull the trigger and apply the drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen;
8. Clean the repaired place with a clean wet cloth.

Package Included:
20 x Yellow Hot Melt Glue Sticks


Size : 11mm*27cm
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 31201600