Cart 2 india

Specification
Brand : LJIA
BulletPoint1 : 1.Combined LED light sources with long life and low power consumption, including UV light;
BulletPoint2 : 2.Switchable apertures: Φ2/4/8/20mm, adapt to more samples;
BulletPoint3 : 3. Accurately measure reflectance spectrum, CMYK density and Lab value of the sample;
BulletPoint4 : 4.High-configuration electronic hardware: 3.5-inch TFT true-color screen, capacitive touch screen, concave grating, 256-pixel dual-array CMOS image sensor, etc.;
BulletPoint5 : 5.Two standard observer angles: 2/10, multiple light source modes and color systems;
BulletPoint6 : Using High Capacity Li-ion Battery Li-ion battery will save cost and charge to ensure the stability of long time measureme
Color : One Color
ExternallyAssignedProductIdentifier : 7504375535547
ExternallyAssignedProductIdentifier1 : 199414362092
ExternallyAssignedProductIdentifier2 : 0199414362092
IncludedComponents : safety bollard post
ItemName : Color Analysis, YD5010 45/0 Spectrodensitometer with CMYK Density and CIE Lab Delte E XYZ for Print and Packaging Industries,Multifunctional Colorimeter
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-colorimeters
Manufacturer : LJIA
Material : abs
MetalType : other
ModelNumber : YD5010
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : YD5010
ProductDescription : Model YD5010
Measurement Geometry 45/0(45 ring-shaped illumination, 0 degree viewing angle); ISO 5-4,CIE No.15
Features Common spectrophotometer densitometer, apply in ink printing, in Film Processing, Textile Printing and Dyeing, Plastic Electronics and Other Industries for Color Measurement and Quality Control;especially suitable for the measurement and quality control of optical density and dot enlargement in ink printing;able to customize single aperture Φ2mm,Φ4mm,Φ8mm.
Light Source Combined LED Light, UV Light
Spectral separation device Concave Grating
Detector 256 Image Element Double Array CMOS Image Sensor
Wavelength Range 400~700nm
Wavelength Pitch 10nm
Half Bandwidth 10nm
Measurement Conditions Compliance with ISO 13655 measurement conditions;
M0 (CIE Light Soure A)
M1 (CIE Light Soure D50)
M2 (Excluding UV light source)
M3 (M2+Polarized light filter)
Density Standards ISO Status A, E, I, T
Density index Density value, density difference, dot area, dot enlargement, overprint, printing characteristics, printing contrast, tone error and gray level
Measurement aperture Customized one aperture:Φ2mm,Φ4mm,Φ8mm optional
Color Spaces CIE LAB,XYZ,Yxy,LCh
Color Difference Formula ΔE*ab,ΔE*94,ΔE*00
Observer Angle 2°/10°
Illuminants A,C,D50,D55,D65,D75,F2,F7,F11,F12
Measurement Time About 1.5s
Repeatability Density: Within 0.01 D
Chromaticity value:within ΔE*ab 0.04 ( When a white calibration plate is measured 30 times at 5 second intervals after white calibration) Except M3
Inter-instrument Error Within ΔE*ab 0.2 (Average for 12 BCRA Series II color tiles) Except M3
Measurement mode Single Measurement, Average Measurement(2-99)
Power source Li-ion battery. 5000 measurements within 8 hours
Display 3.5-inch TFT color LCD, Capacitive Touch Screen
Interface USB,
Data memory 10000 pcs
Working Environment Temperature:0~40℃;Humidity: 0~85% (No Condensatio
ProductSiteLaunchDate : 2025-04-23T05:36:35.359Z
Size : One Size
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 41000000