Cart 2 india

Specification
BatteriesRequired : 1
Brand : LGXEnzhuo
BulletPoint1 : 【Purpose】 The fully automatic melt index meter complies with the provisions of GB/3682-2000; ASTM-D1238, D3364; JIS-K7210; ISO1133 standard. Used to measure the melting behavior of various polymers under viscous flow conditions.
BulletPoint2 : 【Scope of application】 The fully automatic melt index meter is only suitable for measuring the melt flow rate (MFR) of the mass method, and its value can characterize the viscous flow characteristics of thermoplastic materials in the molten state. Suitable for high melting point polycarbonate, polysulfone, and fluoroplastics. It is also suitable for plastics with lower melting points such as polyethylene, polystyrene, and resin.
BulletPoint3 : 【Advantages】 The fully automatic melt index meter has fast heating speed and minimal overshoot; High temperature control accuracy; After filling, it can quickly return to a constant temperature state.
BulletPoint4 : 【Easy to use】 The fully automatic melt index meter has convenient calibration and correction of testing parameters, can use manual and automatic cutting testing methods, and is displayed on a touch screen, equipped with a printer, and automatically prints test results.
BulletPoint5 : 【Parameter】 Temperature range: Room temperature -400 ℃; Temperature control resolution: ± 0.1 ℃; Timing accuracy: 0.1S; Load: Can be composed of: 1.2kg; 2.16 kilograms; 3.8 kilograms; 5kg； 7.16 kilograms; 10 kilograms; Cutting methods: automatic and manual; Inner diameter of material cylinder: 9.550mm ± 0.025mm; Cylinder length: 160mm; Mold: Made of tungsten carbide; Length: 8.000mm ± 0.025mm; Inner diameter: 2.095mm ± 0.005mm; Power: 450W.
Color : Refer to the picture
ExternallyAssignedProductIdentifier1 : 0840403707874
ExternallyAssignedProductIdentifier2 : 840403707874
IncludedComponents : Tester
ItemDisplayDimensions_Length : 205 millimeters
ItemDisplayWeight : 4 kilograms
ItemName : LGXEnzhuo 110V Automatic Melt Flow Index Rate Tester MFR Tester Automatic Melt Index Meter 450W
ItemPackageDimensions_Height : 25.59 inches
ItemPackageDimensions_Length : 19.69 inches
ItemPackageDimensions_Width : 14.96 inches
ItemPackageQuantity : 1
ItemTypeKeyword : science-lab-colorimeters
Manufacturer : LGXEnzhuo
Material : plastic
ModelNumber : E025374
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : E025374
ProductDescription : Specification:
Test method: Quality method (MFR) with printing function
Temperature range: normal temperature -400℃
Display mode: touch screen display
Temperature control accuracy: ±0.1℃
Timing accuracy: 0.1S
Load: can be composed: 1.2kg; 2.16kg; 3.8kg; 5kg; 7.16kg; 10kg
Cutting method: automatic and manual
Inner diameter of material barrel: 9.550mm±0.025mm
Barrel length: 160mm
Mould: the material is tungsten carbide
Length: 8.000mm±0.025mm
Inner diameter: 2.095mm±0.005mm
Power: 450W
Matters needing attention:
1. The single power socket must have a ground wire hole and be reliably grounded.
2. In case of abnormal display on the LCD, shut down the machine first, then restart the machine, reset the test temperature, and start the operation.
3. In normal operation, if the furnace temperature is greater than 450 ℃, the software will protect, interrupt the heating and send an alarm.
4. In case of any abnormal phenomenon, such as temperature control and display failure, shut down the machine for maintenance,
5. When cleaning the piston rod, do not scrape it with hard objects.
ProductSiteLaunchDate : 2024-07-11T08:09:43.202Z
Size : M
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 41000000