1.Colorimeter Introduction
Colorimeter is widely used in different industries for color difference test such as electroplating oxide, plastic cement, printing, paint, coffee, weaving and dyeing. It measures the sample color data L*a*b*, L*c*h*, color difference ΔE and ΔLab according to CIE color space.
2.Colorimeter Advantages
1).Device sensor exports Japan and information processing chip is from USA, which guarantee the optical signal transfer accuracy and electrical signal stability.
2).Multiple color space display color values : L*a*b,L*c*h,Yxy.
3).Can Test Degree of Whiteness and Yellow Degree
4).Ergonomic Design
5).Free Color Management Software
6).Establish the Prototype Data L*a*b* by manually
7).The device could store 100 standard sample groups and every sample group could store 100 sample data.
8).Test different points on sample and get the average value. It is widely used for color control whose color is not uniform.
3.Colorimeter Technical Data
Type CS-220
Illumination system : 8/d(8°/diffused illumination)SCE
Testing Port Diameter : About 8mm
Measuring conditions : CIE 10° standard observer; CIE D65 light source
Measuring range : L*:1-100
Repeatability : Standard deviation within delta E*ab*,below 0.08(testing condition: measure the white calibration board 80 times for average)
Storage : 100 sets of standard samples; up to 100 under each standard sample
Measuring time : About 0.5 seconds
Measuring light source : LED
Languages : Chinese, English
Power : Four AA1.5V Alkaline battery or nickel-metal hydride batterys; Exclusive DC5V adapter
port : USB2.0 printer
weight : 550g
Size : 77×86×210mm