Cart 2 india

Specification
Brand : YUEWO
BulletPoint1 : Used: Widely used in industrial/agricultural production, scientific research, medical and health units, such as laboratory to try drying, heat treatment and heating.
BulletPoint2 : Introduction: This Digital Drying oven is a blast and constant temperature electric heating drying oven, which has a digital display. It is in accordance with ergonomic clasp handle, convenient operation, and ensure the sealing property.
BulletPoint3 : Safety: Using the intelligent PID control technology, the system has temperature control, timing, over temperature alarm function.
BulletPoint4 : Expand: Adjustable vent hole at the top, which can be expanded into the residue of the aging test.
BulletPoint5 : Quality: High temperature silicone rubber is used as the sealing door. High temperature heat pipe is used as heating element to ensure safe and long life.
Color : Blue
ExternallyAssignedProductIdentifier : 6139920678786
ExternallyAssignedProductIdentifier1 : 0688537039146
ExternallyAssignedProductIdentifier2 : 688537039146
FinishType : Powder,Powder Coated
FuelType : Natural Gas
GpsrSafetyAttestation : 1
HeatingMethod : Convection
IncludedComponents : VariKwik Food/Nacho Basket
InstallationType : Freestanding
ItemName : YUEWO 110V 15.6L-210L Blast Drying Oven Laboratory Silent Constant Temperature Stainless Steel Oven Intelligent Digital Display Drying Electromechanical Oven (202-00S)
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 14.5 inches
ItemPackageDimensions_Width : 20.75 inches
ItemPackageQuantity : 1
ItemTypeKeyword : commercial-ovens
Manufacturer : YUEWO
Material : Steel
ModelNumber : 5X5X7GPCO100919
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : ZH041-Y-US
ProductDescription :

• Feature
• The 101-1 series drying boxes are designed with strong convection air ducts and side centrifugal wind wheel design to ensure continuous circulation of wind power.
• This series of drying ovens is designed with a reinforced keel and a reinforced sheet at all four corners. Even if the temperature reaches 250 degrees or above, the cabinet will not be deformed.
• The whole shell adopts electrostatic spraying technology, which can achieve ten years of no rust, environmental protection and practicality.
• Steps
• 1. Open the door, put the items that need to be dried on the partition inside the box, close the door, adjust the vent hole at the top of the instrument to the required state, and make appropriate according to the temperature of the dried item during the drying process. Adjustment.
• 2. Connect the power supply that requires the same equipment as the device, and ground the ground terminal of the power socket you are using.
• 3. Turn on the power switch and heating switch, the indicator light is on, the instrument starts to work, and the temperature control meter starts to display the temperature of the studio.
• 4. According to the temperature of the dried goods, you need to set the required temperature.
• 5. The instrument can turn on or off the fan cycle as needed. It must be noted that the device cannot be turned off during the heating process to avoid excessive aging of the heating components.
• 6. Turn off the power and heating switch of the equipment after the work is finished. It is recommended to wait for the equipment to cool before opening the door to deal with the problem.
• 7. It is recommended to use the device for self-tuning and temperature control for the first time to ensure accurate and safe use.

ProductSiteLaunchDate : 2019-11-30T08:00:00.000Z
Size : 101-1-70L
StreetDate : 2023-06-22T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
TimerFunction : Timer Function Available
UnitCount : 1
UnspscCode : 41000000
Voltage : 120 volts
Wattage : 350000 watts