Cart 2 india

Specification
Brand : ZIRANU
BulletPoint : 74LCXH16244MTDX TSSOP-48 (4Pieces)
BulletPoint1 : LD06AJSA / B is a current regulation integrated circuit operating from input of 2.8 V to 6 V, the constant output current can be set to 1.5A with external resistor. the LD06AJSA / B consists of high reference amplifier, current
BulletPoint2 : The on-chip power transistor and current block significantly reduce the number of external components, which makes the LD06AJSA / B ideal for LED driver.
BulletPoint3 : When the pin is high, the input is greater than 2.8 V, and is than the direct LED plus the required drop, LD06AJSA / B normally operates to provide constant current from the PULLOBEE.
BulletPoint4 : The LD06AJSA / B adopts temperature regulation instead of temperature function, the temperature regulation can cause the LEVOU to be switched on continuously in case of high temperature or fall.
BulletPoint5 : When the LD06AJSA / B temperature junction reaches about 135 ° C, the internal temperature setting of reduces the current so that the temperature of the LED junction will not rise further. this feature allows users to maximize the use of the power handling ability of the chip, do not worry about the chip overheating and damage to the chip or external components.
ExternallyAssignedProductIdentifier : 7679510139246
ItemName : for 2.8-6V 30-1500MA 1.5A LED Driver PWM Control Board Module Adjustable
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : communication-integrated-circuits
Manufacturer : ZIRANU
NumberOfItems : 1
PartNumber : ZIRANU
ProductDescription : For 2.8-6V 30-1500MA 1.5A LED Driver PWM Control Board Module Adjustable

Description
LD06AJSA / B is a current regulation integrated circuit operating from input of 2.8 V to 6 V, the constant output current can be set to 1.5A with external resistor. the LD06AJSA / B consists of high reference amplifier, current The on-chip power transistor and current block significantly reduce the number of external components, which makes the LD06AJSA / B for ideal for LED driver.
When the pin is high, the input is greater than 2.8 V, and is than the direct LED plus the required drop, LD06AJSA / B normally operates to provide constant current from the PULLOBEE. The LD06AJSA / B adopts temperature regulation instead of temperature for function, the temperature regulation can cause the LEVOU to be switched on continuously in for case of high temperature or fall. When the LD06AJSA / B temperature junction reaches about 135 ° C, the internal temperature setting of reduces the current so that the temperature of the LED junction will not rise further. this feature allows users to maximize the use of the power handling ability of the chip, do not worry about the chip overheating and damage to the chip or external components.
The LD06AJSA / B also has the function of allowing the chip, which can the whole chip to limit the shutdown current consumption within 1uA.
The LD06AJSA / B also adopts the current overload for block. When the current LED 1.9A approaches (Typical), the on the current block for starts the function to the current LED from increasing.
Application 1: Wiring according to the following figure, use a suitable screwdriver carefully and slowly rotate the adjustable resistance.
Application 2: Adjust the adjustable resistance to 0 ohms (or maximize the current according to Or
ProductSiteLaunchDate : 2025-02-28T01:04:07.000Z
UnitCount : 1
UnspscCode : 32101600