Cart 2 india

Specification
Brand : Star Products
BulletPoint1 : ENGINE CYLINDER LEAKAGE TEST: cylinder leak gauge set is designed to detect a variety of common engine faults including: worn piston rings, worn valves, cracks in cylinder walls and blown head gaskets. Available with either single gauge shows % of cylinder leakage (marked with color coded range HIGH MODERATE LOW SET), or twin gauge manifold show cylinder leakage and cylinder pressure (0-100psi/0-7bar). Suitable for any gasoline engine with 14, 12 or 10mm spark plugs.
BulletPoint2 : WORKING PRINCIPLE OF LEAKDOWN DETECTOR: Once the leakage tester has been connected to one of the cylinders, compressed air (45-100psi) is fed into that particular cylinder through the built in pressure regulator. Diagnosis is made by observing the amount of leakage that is indicated on the cylinder leakage gauge and by listening for leakage at various points of the cars system. The instruction has detailed introduces about notification, connection method, steps, fault diagnos
BulletPoint3 : CYLINDER COMPRESSION TEST AND DIAGNOSTIC: engine compression tester kit is used for measuring pressure on gasoline engine cylinder quickly and accurately. The gauge readings assist to diagnose if there are following problems: valve sticking, carbon build-up, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, burned or damaged piston. Please refer to the vehicle manufacturer's service instructions or proprietary manual and our manual for details.
BulletPoint4 : WIDE USE OF ENGINE COMPRESSION TESTER: There are 16" long flexible extension hose with 4 sizes (10mm 12mm 14mm 18mm) selectable brass adapters in the cylinder tester set, widely suitable for most types and depth spark plug well on gasoline petrol gas fuel engine cylinder, which is common in motorcycle, car, truck, lawn mower, ATV and so on. Please note, the gauge is not used for most engine, due to the low pressure range 0-300PSI.
BulletPoint5 : UNIVERSAL GASOLINE ENGINE CYLINDER TESTER CONNECTORS: The straight and angled push-on connectors are equipped with rubber tapered tip for easy and quick installation, you just need to push and hold it seal against cylinder head, rather than screw to tighten like 10mm 12mm 14mm 18mm appropriative adapters. These push-on connectors are also for some types and depth spark well, which the appropriative adapters do not fit.
Color : popular
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 5018341045104
ExternallyAssignedProductIdentifier1 : 0763279221001
ExternallyAssignedProductIdentifier2 : 763279221001
GpsrSafetyAttestation : 1
IncludedComponents : BGS 8008-52 | Compression / Pressure Loss Adapter | for Citroen, Jaguar, Peugeot, Volvo
ItemName : SMALL ENGINE TESTER 200PSI
ItemPackageDimensions_Height : 35.9918 centimeters
ItemPackageDimensions_Length : 9.1948 centimeters
ItemPackageDimensions_Width : 26.4922 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : automotive-stethoscopes
Manufacturer : Lang Tools
Material : Alloy Steel
Material1 : Rubber
Material2 : Brass
Material3 : Iron
Material4 : Copper
Material5 : Plastic
MeasurementAccuracy : /
MeasurementSystem : Metric
ModelName : 13 diesel engine compression test set
ModelNumber : TU21
NumberOfItems : 1
PackageLevel : unit
PartNumber : TU21
PowerSourceType : Hand-operated
ProductDescription :

• Will test all small engines with M14 or M18 threads
• Valve core at bottom ensures accurate readings
• The 1-1/2" gauge has a dual scale dial with ranges from 0-200 PSI and 0-14 bar
• Also available as part of STATU30A A and E Hand Tools Compression Test Kit

ProductSiteLaunchDate : 2017-06-27T00:00:00.000-07:00
Size : normal
StreetDate : 2020-02-19T00:00:01Z
Style : Adapter | for Citroen, Jaguar, Peugeot, Volvo
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 25191800