Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : [3D Printer Compression Spring] The outer diameter of the 3D printer compression spring is 22mm/0.87", the inner diameter is 11.5mm/0.45", and the free length is 35mm/1.38", you will receive 8 pcs of 3D printer compression springs, please confirm the size before purchasing to ensure use
BulletPoint2 : [Material] The 3D printer heated bed spring is made of steel, which is wear-resistant, sturdy, durable, not easy to break, and harder than ordinary springs, which helps to stabilize printing
BulletPoint3 : [Function] These compression springs are designed to replace the original springs in the printer bed, avoiding the need to level the bed before each print, providing more tension and stability, and making bed leveling more precise and firm
BulletPoint4 : [Installation] Use a spring compressor to compress the spring to a length suitable for installation, then place the spring at the predetermined installation position, use screws, nuts, and other fixings to fix the spring at the installation position firmly, and finally slowly release the spring compressor
BulletPoint5 : [Wide Application] It is suitable for most 3D printer heated beds, as well as automobiles, electrical appliances, instruments, and more
Color : M8
Coverage : 36 square inches
ExternallyAssignedProductIdentifier1 : 0758091726759
ExternallyAssignedProductIdentifier2 : 758091726759
HandOrientation : Square
ItemForm : Sheet
ItemName : uxcell 8pcs 3D Printer Heating Bed Spring, 22mm OD 35mm Length Light Load Compression Mould Die Spring 3D Printer Compression Spring for 3D Printer Electric Part, Yellow
ItemPackageDimensions_Height : 1.18 inches
ItemPackageDimensions_Length : 5.51 inches
ItemPackageDimensions_Width : 3.94 inches
ItemPackageQuantity : 8
ItemShape : Rectangular
ItemTypeKeyword : 3d-printer-accessories
Manufacturer : uxcell
Material : rubber
Material1 : Sorbothane rubber
Material2 : Polyurethane rubber
ModelName : Sorbothane Film
ModelNumber : FM1302V0911KS
NumberOfItems : 4
PartNumber : a25011300ux1052
ProductDescription : Description:
[Material] The 3D printer heated bed spring is made of steel, which is wear-resistant, sturdy, durable, not easy to break, and harder than ordinary springs, which helps to stabilize printing.
[Function] These compression springs are designed to replace the original springs in the printer bed, avoiding the need to level the bed before each print, providing more tension and stability, and making bed leveling more precise and firm.
[Installation] Use a spring compressor to compress the spring to a length suitable for installation, then place the spring at the predetermined installation position, use screws, nuts, and other fixings to fix the spring at the installation position firmly, and finally slowly release the spring compressor.
[Wide Application] It is suitable for most 3D printer heated beds, as well as automobiles, electrical appliances, instruments, and more.

Specification:
Material: Spring Steel
Load Type: Light Load
Color: Yellow
Hole Diameter(Outer Diameter): 22mm/0.87"
Inner Diameter (tolerance +0.5mm): 11.5mm/0.45"
Free Length: 35mm/1.38" (+/- 2mm)
Max Compression Rate: 50%
Maximum Load: 15000N/S

Package Content: 8 Pcs x Compression Die Spring


ProductSiteLaunchDate : 2025-02-26T11:04:26.867Z
RecommendedUsesForProduct : Vibration and acoustic isolation for audio and electronic equipment, speakers, and various other applications
Size : 22mm OD 35mm Length
Style : 4Pcs Single Side-adhensive
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 8
UnspscCode : 30266400