Cart 2 india

Specification
AirFlowCapacity : 57.67 cubic_feet_per_minute
Brand : Envistia
BulletPoint : 10 pcs 21*15*10mm Heatsink Cooling Fin Radiator Cooler Aluminum Heat Sink for TO3 TO-3 Transistor 21X15X10mm
BulletPoint1 : Heatsink Size:100*60*10MM / 3.93''x 2.36''x 0.39'' (L*W*H), Weight : 79g
BulletPoint2 : The fins increase the area of the board and thus provide for greater heat transfer. Strong heat conductivity and heat dissipation.
BulletPoint3 : Used for computers, power transistors, FET, IC, power amplifiers, voltage regulators, MOSFET, SCR, etc.
BulletPoint4 : Reduce the risk of hardware failure due to overheating
BulletPoint5 : 6 Color Options: Blue, Green, Red, Orange Pink, White. Comes in 1/2/3/5/10 packs.
Color : Cosmos White
CompatibleDevices : Gaming Console
CoolingMethod : Air
ExternallyAssignedProductIdentifier1 : 0732387204312
ExternallyAssignedProductIdentifier2 : 732387204312
IncludedComponents : 1pcs heatsink
ItemName : Heatsink 100x60x10MM / 3.93''x 2.36''x 0.39'' Aluminum Heat Sink Radiator Cooling Cooler for Power Transistor, FET, IC, Power Amplifier, Voltage Regulator, MOSFET - Sliver
ItemPackageDimensions_Height : 0.45 inches
ItemPackageDimensions_Length : 2.5 inches
ItemPackageDimensions_Width : 4.25 inches
ItemPackageQuantity : 1
ItemTypeKeyword : desktop-computer-heatsinks
Manufacturer : Envistia Mall
Material : Rubber
Material1 : Aluminum
Material2 : Copper
MaximumRotationalSpeed : 1350 rpm
ModelNumber : 100x60x10mm Aluminum Heatsink
MountingType : Panel Mount
NoiseLevel : 24.7 decibels
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : 100x60x10mm Aluminum Heatsink
PowerConnectorType : 3pin,4pin
ProductDescription :

Aluminum heatsinks are used for cooling TECs (Peltier Elements), high power LEDs, ICs and other electronic components. The thermal conductivity of the aluminum and the surface area of the fins increases the area of the plate thus provides greater heat transfer.

Reduce the risk of hardware failure due to overheating. Just use thermally conductive adhesive, double-sided thermal tape or a clamp and thermal compound to mount the device to the heatsink. Glue, tape or thermal compound are not included here.

Specifications:

• Type: Aluminum Extrusion Heatsink, Unanodized
• Material: Aluminium
• Size: 100mm x 60mm x 10mm / 3.94" x 2.36" x 0.39" (Approx.）
• Number of fins: 16
• Fin thickness: 1mm
• Baseplate thickness: 2.2mm
• Fin pitch: 3.8mm
• Weight: 78 grams

ProductSiteLaunchDate : 2020-03-22T11:54:54.940Z
StreetDate : 2023-05-24T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 32131000
Voltage : 12 volts
Wattage : 125 watts