Cart 2 india

Specification
Brand : Horiznext
BulletPoint1 : ➤Made of carbon steel, heavy duty, durable.
BulletPoint2 : ➤Diameter of anchor: 3/4 inch.
BulletPoint3 : ➤Length of the anchor: 6-1/4" inches.
BulletPoint4 : ➤Corrosion resistant - zinc-plated.
BulletPoint5 : ➤Great for use in CONCRETE only, and should never be used in block or brick base material.
Color : Black and Gold
CustomerPackageType : Standard Packaging
ExteriorFinish : Steel
ExternallyAssignedProductIdentifier : 8431271499026
ItemName : Horiznext 3/4" x 6-1/4" Wedge Anchor, for Cement and Concrete only, zinc-Plated Carbon Steel Screws and lag Bolts （ 10 pcs
ItemPackageDimensions_Height : 21.59 centimeters
ItemPackageDimensions_Length : 8.7884 centimeters
ItemPackageDimensions_Width : 21.3106 centimeters
ItemTypeKeyword : wedge-anchors
Manufacturer : Horiznext
ManufacturerGrade : Grade 2
Material : Carbon Steel
MetalType : Carbon Steel
ModelNumber : CA12-1Ae1805
NumberOfItems : 10
NumberOfPieces : 10
PartNumber : 822179
ProductDescription : * Made of carbon steel that resist pressure.
* Designed for use in Concrete only, and should never be used in block or brick base material.
* Used in wall, door, concrete, masonry cement, fence, industrial, house and garden etc.

Material: galvanized carbon steel
Spacing between Anchors: a minimum distance of 7-1/2"
Edge Distance：3-3/4"
Torque Value: between 150 - 175 ft./lbs
Fixture Hole Diameter: The 3/4" diameter anchor requires the hole in the fixture to be 1"
Maximum Fixture Thickness: The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is 2-1/4". This will ensure that the minimum embedment of 3-1/4" will be met.
Minimum Embedment：The minimum anchor embedment into the concrete is 3-1/4". Therefore, the anchor must be installed so that a minimum of 3-1/4" of the anchor is embedded into the concrete.
Hole Diameter/Bit Diameter: The anchor requires a 3/4" hole to be drilled in the base material (Concrete only). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.

Package Included:10 pcs.
The stainless steel reducing coupler is excellently designed and proven reliable. If you have any question or dissatisfaction about the products, pls contact us. If you are interested in purchasing large quantity, welcome to email us to get a good price and product details.
ProductSiteLaunchDate : 2020-06-10T00:00:00.000-07:00
Size : 3/4" x 6-1/4"
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 10
UnspscCode : 31161500