Cart 2 india

Specification
Brand : Simpson Strong-Tie
BulletPoint1 : Head-stamped for easy identification
BulletPoint2 : Serrated teeth on the tip facilitates cutting and reduces installation torque
BulletPoint3 : Thread design undercuts to efficiently transfer the load to the base material
BulletPoint4 : Specialized heat-treating process creates tip hardness for better cutting without compromising ductility
BulletPoint5 : Hex washer head requires no separate washer, unless required by code
Color : Red
CompatibleGrooveDiameter : 0.5 inches
CustomerPackageType : Standard Packaging
DriveSystem : External Hex
DriveSystem1 : Phillips
DriveSystem2 : External Hex
ExteriorFinish : Zinc
ExternallyAssignedProductIdentifier : 7613023596394
ExternallyAssignedProductIdentifier1 : 707392145318
ExternallyAssignedProductIdentifier2 : 0707392145318
ExternallyAssignedProductIdentifier3 : 00707392145318
ItemName : Simpson Strong-Tie THD37600HMG Titen HD 3/8 in. x 6 in. Mechanically Galvanized Heavy-Duty Screw Anchor (50-Qty)
ItemPackageDimensions_Height : 9.398 centimeters
ItemPackageDimensions_Length : 9.652 centimeters
ItemPackageDimensions_Width : 32.512 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : concrete-screws
Manufacturer : Simpson Strong Tie
Material : Carbon Steel
MaximumShearStrength : 3748 pounds
MeasurementSystem : Imperial
MetalType : Alloy Steel
ModelNumber : THD37600HMG
NumberOfItems : 1
NumberOfPieces : 50
PartNumber : THD37600HMG
ProductDescription : From the Manufacturer Red Head Tapcon Hex Washer Head 1/4 X 2-1/4 Inch Anchor is the "original masonry" anchor that cuts its own threads into concrete, brick, or block. Maximum performance is achieved because the Tapcon Anchor, the Condrive Installation Tool, and the carbide-tipped Tapcon Drill Bits are designed to work as a system. It is essential to use the Condrive tool and the correct drill bit to assure consistent anchor performance. The Hex Head style on Tapcon Anchors is available for majority of fixture anchoring needs and works in all masonry base materials. The Climaseal Coating is standard on all Tapcon anchors to provide extended corrosion resistance. Advanced thread form cuts into masonry materials for greater stability and pullout values Lengths of Tapcon Anchors range from 1-1/4 inch to 4 inch in 3/16 inch and up to 6 inch 1/4 inch diameters. Nail-Type Point guides the anchor into the pre-drilled hole, so no hole spotting or inserts are required. These anchors install fast and easily (three anchors per minute), and are excellent for wood to concrete applications. Specs: Fixture Thickness - 3/4 to 1-1/4 inch; Bit Length - 4-1/2-Inch inches.
ProductSiteLaunchDate : 2012-08-31T00:00:01-00:00
Size : 6 inches
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 31161500