Cart 2 india

Specification
Brand : Estink
BulletPoint1 : Using Method:Put the plug in the connection of the tester. Press the yellow button on the side of the tester.
BulletPoint2 : Note:If a LED doesn't light up, it is because the corresponding wire is defective. If all the LEDs don't light up, then the mass wire is damaged or all bulbs are defective.
BulletPoint3 : Application:Widely used for Trailer (can also be a or carrier)
BulletPoint4 : High Performance: Professionally manufactured, and to use
BulletPoint5 : Car Camper:Put the tester in the socket of the car. Press the yellow button on the side of the tester. If the wiring is good, all the LEDs light up. Do again steps 4 as previous.
Color : Black
CompatibleDevices : Python No Spill Clean & Fill systems
ConnectorGender : Male-to-Female
ConnectorType : Sumitomo Mt Series, Sumitomo Ts Series
ExternallyAssignedProductIdentifier1 : 0736077180351
ExternallyAssignedProductIdentifier2 : 736077180351
GpsrSafetyAttestation : 1
IndoorOutdoorUsage : indoor
IndoorOutdoorUsage1 : outdoor
IndoorOutdoorUsage2 : indoor
ItemName : Trailer Tester Tool, 7Pin 12V Car Towing Trailer Plug Socket Connection Tester Diagnostic Tool Black
ItemPackageDimensions_Height : 21.9 centimeters
ItemPackageDimensions_Length : 4.8 centimeters
ItemPackageDimensions_Width : 7.9 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : trailer-connectors
Manufacturer : Estink
Material : plastic
MeasurementType : Electrical Tester
ModelName : 118451
ModelNumber : 118451
NumberOfPins : 1
PartNumber : JZZ-GL-US-828
PowerSourceType : Corded Electric
ProductDescription :
Function and :

Trailer (can also be a or carrier)
Put the plug in the connection of the tester.
Press the yellow button on the side of the tester.
If the wiring is good, all the LEDs light up. the function of each LED is (acc lso 1724):
1. left hand indicator (yellow);
2. foglight or 12V (blue);
3. mass (white);
4. right hand indicator (green);
5. right rearlight (brown);
6. left brake light (red);
7. left rearlight (black). Attention: The pin no 2 can be used either for a warning foglamp or a permanent 12V connection.
If a LED doesn't light up, it is because the corresponding wire is defective. If all the LEDs don't light up, then the mass wire is damaged or all bulbs are defective.
You can also test the functions of each pin of the socket.

1. Switch on the left hand indicator (after switching on the ignation key).
2. The corresponding LED must flash with the same frequency. If not, left hand indicator wiring is defective/broken.
3. Repeat steps 1 and 2 for the right hand indicator, rearlight, foglight and stoplights.
With a +/- 4 m extension cable, you can test the functions form the driver's seat more easily.
Specification:

Main Material: ABS and Copper
Color: black
Item Type: Diagnostic Tools
Item Name: Trailer Tester
Size: approx. 20 * 5 * 4cm
Battery Type: 9V (not included, you need additional purchase)
Package Size: 20 * 5.5 * 4.5cm / 7.9 * 2.2 * 1.8in
Package Weight: 194g / 6.8oz
Package includes:

1 * 7-Pin Trailer Tester Tool
1 * English Paper
ProductSiteLaunchDate : 2018-12-20T08:00:00.000Z
RecommendedUsesForProduct : Aquarium Maintenance
Size : 8 Feet
StreetDate : 2012-02-24T00:00:01Z
Style : Tool
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 25191800
Wattage : 800 watts