Cart 2 india

Specification
Amperage : 80 amps
Brand : CYTGOUPER
BulletPoint : Smart Bridge connect to Alexa/Google and App smart control.
BulletPoint1 : DUAL POWER SUPPLY: Power supply 1, DC 6.5-25V; Power supply 2, DC 5V.(two power supplies cannot be powered at the same time).WORKING CURRENT: (Normal Mode) Standby current 41mA, working current 83mA; (Energy-Saving mode) Standby current 7mA, working current 44mA
BulletPoint2 : REVERSE MOTOR CYCLE TIMES: No cycle, 2-99 cycles, always cycle. Delay time: 0.1-.9 seconds, 1-9999 seconds, 1-9999 minute
BulletPoint3 : TWO INPUT MODES: The motor speed controller has two input trigger modes, Low-Pulse trigger mode, Low-Level trigger mode
BulletPoint4 : EXQUISITE DESIGN: There are three input control port: forward control(FWD),reverse control(), and stop control(STOP)
BulletPoint5 : WIDE APPLICATION: This is a multi-function 24v motor controller forward and controller with multiple control modes. Many control functions can be derived through reasonable settings. The electrical motor control board can control 2-way solenoid valve, pumps, motors, lights
CircuitBreakerType : Standard
Color : As Shown
ConnectorType : Screw
CurrentRating : 5 amps
ExternallyAssignedProductIdentifier : 9631201414146
ExternallyAssignedProductIdentifier1 : 0685330023914
ExternallyAssignedProductIdentifier2 : 685330023914
IncludedComponents : No
ItemDisplayWeight : 12 pounds
ItemName : CYTGOUPER 5V - 24V Motor Speed Controller Time Delay Relay, Reverse Motor Timing Cycle Module Motor Controller Board with LCD
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 12 centimeters
ItemPackageDimensions_Width : 8 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electric-motor-controls
Language : english
Manufacturer : CYTGOUPER
Material : copper
ModelName : CYTGOUPER2uwigv3mc9
ModelNumber : CYTGOUPER2uwigv3mc9
MountingType : DIN Rail Mount
NumberOfItems : 1
NumberOfPoles : 3
OperationMode : Manual
PackageLevel : unit
PartNumber : CYTGOUPER2uwigv3mc9
PhaseType : 3 phase,three,three phase
ProductDescription : Features:
Dual power supply (two power supplies cannot be powered at the same time): Power supply 1, DC 6.5-25V; Power supply 2, DC 5V
Working current: (Normal Mode) standby current 41mA, working current 83mA; (Energy-Saving mode) Standby current 7mA, working current 44mA.
There are three input control port: forward control(FWD), reverse control(), and stop control(STOP).
Two input trigger modes, Low-Pulse trigger mode, Low-Level trigger mode
Delay time: 0.1-999.9 seconds, 1-9999 seconds, 1-9999 minutes.
Cycle times: no cycle, 2-99 cycles, always cycle.
Three indicators: forward indicator(F LED), reverse indicator(R LED), stop indicator(S LED).
Relay load current, recommended less than 5A.

Port:
DC 5.5MM female : Power supply 1, DC 5V power supply.
VIN: Power 2 positive, DC 6.5-25V power supply
GND: Power supply 2 negative
FWD: Forward input control (partial Function-Mode is invalid)
: reverse input control (partial Function-Mode is invalid)
STOP : Stop input control (partial Function-Mode is invalid)
M+: Motor positive
M-: Motor negative
P+: Positive terminal for motor power supply
P-: negative terminal for motor power supply

Specification:
Power supply: DC 6.5-25V, DC 5V
Working current: 83mA
Standby current: 41mA
Relay load current:
Delay time: 0.1-999.9 seconds, 1-9999 seconds, 1-9999 minutes
Size: 8*5cm/3.2*2in
Weight: Approx. 51g/1.8oz

Trigger mode:
1 low pulse trigger (falling trigger)
2 low level trigger (rising trigger)

Timer:
T1: Forward timer
T2: reverse timer
T3: Stop timer
Time unit : 0.1 second, 1 second, 1 minute


ProductSiteLaunchDate : 2024-11-26T08:23:21.538Z
Size : 48V 1000W
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 26111500
Voltage : 120 volts
Wattage : 2075 milliwatts