Cart 2 india

Specification
Brand : IndustrialField
BulletPoint : Shihlin TH-P12PP Thermal Overload Relay 15A (12-18A)
BulletPoint1 : Connect to cloud server via wired ETHERNET, one to one monitoring
BulletPoint2 : Multiple ports for communication with genset control module: RS485, RS232, LINK and USB (Host); can monitor great majority genset control modules of international first-class brands
BulletPoint3 : Widely power supply: DC (8~35)V, can direct use genset build-in starter battery
BulletPoint4 : With ARM-based 32-bit SCM, high integration of hardware and strong programming ability
BulletPoint5 : Include with GPS locate function to achieve gain location information and locate genset
CurrentRating : 15 amps
ExternallyAssignedProductIdentifier : 4793392488056
ExternallyAssignedProductIdentifier1 : 0731630323312
ExternallyAssignedProductIdentifier2 : 731630323312
ItemName : Double BTS7960 B BTS7960B DC 43A Stepper Motor Driver Module H-Bridge PWM Module for Arduino Smart Car
ItemPackageDimensions_Height : 5.5118 centimeters
ItemPackageDimensions_Length : 3.6068 centimeters
ItemPackageDimensions_Width : 3.81 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electric-motor-controls
Manufacturer : IndustrialField
Material : Copper
MaximumSwitchingCurrent : 15 amps
OperationMode : Automatic
PartNumber : IF-modulen_11624
ProductDescription :
BTS7960B H-bridge 43A high-power motor driverModuleOverview:

This driver uses Infineon chips BTS7960 composed of high-power drive full H-bridge driver module with thermal over-current protection. Double BTS7960 H-bridge driver circuit, with a strong drive and braking, effectively isolating the microcontroller and motor driver! High-current 43A


Features:

Double BTS7960 large current (43 A) H bridge driver;
5V isolate with MCU, and effectively protect MCU;
5V power indicator on board;
voltage indication of motor driver output end;
can solder heat sink;


Just need four lines from MCU to driver module (GND. 5V. PWM1. PWM2);
isolation chip 5 V power supply (can share with MCU 5 V);
size: 4 * 5 * 1.2 cm;
Able to reverse the motor forward, two PWM input frequency up to 25kHZ;
two heat flow passing through an error signal output;
isolated chip 5V power supply (can be shared with the MCU 5V), can also use the on-board 5V supply;
the supply voltage 5.5V to 27V;



9542

RoarKit sensor module








ProductSiteLaunchDate : 2019-10-14T19:05:52.020Z
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 26111500
Voltage : 50 volts