Cart 2 india

Specification
Amperage : 18 amps
Brand : Liccx
BulletPoint1 : This dc motor controller driver is featured with strong driving ability, strong anti-interference ability and low calorific value. It is , and has long service time.
BulletPoint2 : HIGH WORKING EFFICIENCY: The motor drive board module adopts L298N as main control chip, ensuring higher working efficiency. It is normally used for driving stepping motor on smart cars or robots.
BulletPoint3 : NOTICE ONE: When driving voltage is 7V-12V, it can use on-board 5V logic voltage as power supply; when using on-board 5V as power supply, do not input voltage on the +5V terminal,however,it can to 5V voltage for external use. (this is a regular application)
BulletPoint4 : NOTICE TWO: When driving voltage is higher than 12V and less than or equal to 24V, for example, to drive motor with a rated voltage of 18V, first of all, you must pull out the jumper of on-board 5V output enable.Then connect 5V to the 5V output port external.
BulletPoint5 : [Package included]: 2pcs BTS7960 IBT-2 h bridge motor driver
Color : Blue
ExternallyAssignedProductIdentifier : 8130885894035
ExternallyAssignedProductIdentifier1 : 0696333764346
ExternallyAssignedProductIdentifier2 : 696333764346
ExternallyAssignedProductIdentifier3 : 00078477374399
IncludedComponents : controller
ItemName : Motor Drive Controller Board Module, Professional H Bridge Stepper Motor Driving Module, 2A 5V-35V DC Motor Driver for Smart Car Robot Power
ItemPackageDimensions_Height : 10.1092 centimeters
ItemPackageDimensions_Length : 3.302 centimeters
ItemPackageDimensions_Width : 5.5118 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electric-motor-controls
Manufacturer : Liccx
Material : Copper
ModelNumber : Liccxgc1tuvohse
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : Liccxgc1tuvohse
PhaseType : 3 phase,3-phase
ProductDescription : Specifications:

Work Mode: H bridge drive (-channel)

Main Control Chip: L298N

Logic Voltage: 5V

Drive Voltage: 5V-35V
Logic Current: 0mA-36mA

Drive Current: 2A( single-bridge)

Storage Temperature: -20¡æ to +135¡æ

. Power: 25W

Size: 4.5*4.5*2.8cm/1.7*1.7*1.1in

Weight: 27g(approx.)

Notes:
1. When driving voltage is 7V-12V, it can use on-board 5V logic voltage as power supply; when using on-board 5V as power supply, do not input voltage on the +5V terminal,however,it can to 5V voltage for external use. (this is a regular application)
2. When driving voltage is higher than 12V and less than or equal to 24V, for example, to drive motor with a rated voltage of 18V, first of all, you must pull out the jumper of on-board 5V output enable.Then connect 5V to the 5V output port external.
5V enable is a control with a 5V level; when the input is valid and power supply of motor drive module is normal, motor driver module outputs current. Otherwise, even if the power supply is normal, there is no current on motor.

Package Includes:

1 x Motor Driver

ProductSiteLaunchDate : 2020-08-05T12:19:55.847Z
Speed : 200 rpm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
UnitCount : 1
UnspscCode : 26111500
Voltage : 27 volts_of_direct_current
Wattage : 2.1 kilowatts