Cart 2 india

Specification
Brand : Sherline
BulletPoint1 : Drive unit for Sherline lathe or mill
BulletPoint2 : Motor is a sub-fractional horsepower brush-type permanent magnet motor
BulletPoint3 : DC voltage 90V DC to motor (60 Hz)
BulletPoint4 : sherline lathes and mills
BulletPoint5 : Features: By optimizing PWM control technology and electromagnetic compatibility, the inverter meets the user's requirements of low noise and low electromagnetic interference. Comprehensive circuit to prevent over-current, over-voltage, over-heat, overload and under-voltage.
BulletPoint6 : Favorite position. 3 speeds, 2-way RF communication
CircuitBreakerType : Standard
Color : White
ConnectivityTechnology : USB
CurrentRating : 16 amps
ElectricalOutputWaveform : pure_sine_wave
ExternallyAssignedProductIdentifier : 4015080469384
ExternallyAssignedProductIdentifier1 : 0604015637741
ExternallyAssignedProductIdentifier2 : 604015637741
FabricType : Nullify
Horsepower : 0.5 horsepower
IncludedComponents : inc
ItemName : Sherline DC Motor and Speed Control 33050
ItemPackageDimensions_Height : 22.8 centimeters
ItemPackageDimensions_Length : 15.5 centimeters
ItemPackageDimensions_Width : 16.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electric-motor-controls
Manufacturer : Sherline
Material : Copper
ModelName : VFD
ModelNumber : 097b8d9c-2fc0-4876-916a-3233344c9443
MountingType : Wall Mount
NumberOfItems : 1
NumberOfPoles : 1
OperationMode : Automatic
PartNumber : sher-33050
PeakOutputPowerWatts : 6600
PowerSourceType : PowerSource
ProductDescription : Sherline DC Motor and Speed Control 33050
DC Motor and Speed Control
The 90-volt DC motor provides far more than that of the 1/2 HP AC/DC motor we used to offer prior to 1994. A DC motor offers its maximum torque at low RPM where you need it most, so the full speed horsepower rating of an AC/DC motor can be a little deceiving as far as offering practical, useable power. The DC motor also offers smoother and quieter operation. The motor now features externally replaceable brushes, making replacement of worn brushes a simple task taking just a few minutes.
To power and control the motor a more sophisticated speed control unit is required. The control we have developed accepts any incoming AC current from 100 VAC to 240 VAC, 50 or 60 Hz and automatically outputs 90 VDC to the motor, so this unit can be used anywhere in the world without a transformer. All you need is the correct wall plug or converter. In addition, a load compensating circuit has been designed into the controller.
As load is applied, the speed control will add power to attempt to hold a constant speed. Once the on/off switch is switched to the "ON" position, a speed control knob is used to vary the speed over the entire range. With the two-position pulley in the "normal" position on a Sherline headstock, the speed range is about 70 to 2800 RPM. In the "high torque" position the maximum speed is cut in half but torque at any given speed is much greater. If you are using the motor in non-Sherline applications, the maximum no-load speed of the motor shaft itself is 6000 RPM.
ProductSiteLaunchDate : 2021-03-15T15:28:09.339Z
RecommendedUsesForProduct1 : Workshop
RecommendedUsesForProduct10 : Centrifuger
RecommendedUsesForProduct11 : Elevator
RecommendedUsesForProduct2 : CNC router
RecommendedUsesForProduct3 : Spindle motor
RecommendedUsesForProduct4 : Grinder
RecommendedUsesForProduct5 : Mixer
RecommendedUsesForProduct6 : Ventilator
RecommendedUsesForProduct7 : Slitter
RecommendedUsesForProduct8 : Conveyor
RecommendedUsesForProduct9 : Treadmills
RoomType : all rooms
Size : 1"W x 5"H
Speed : 6000 rpm
Style : Unique
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 26101200
Voltage : 3 volts
Wattage : 2.2 kilowatts