Details
Observation Window: The super-large double-layer tempered glass observation window is convenient for observing the changes of the items in the box.
Moisture Drainage Hole: The moisture drainage hole at the top can quickly discharge the moisture inside to maintain a good drying effect.
Specification
Model: 101-0AB
Material: Cold Plate+Stainless Steel
Color: White
Finish Type: Spraying
Plug Type: US
Voltage: 110v, 60Hz
Power: 1500w
Capacity: 45L/12gal
Temperature Control Range: +10-300 ℃/50-572℉
Temperature Resolution: 0.1℃/32.2℉
Temperature Fluctuation: ± 1℃
Package Size: 70*57*60cm/27*22.44*23.62in
Gross Weight: 37kg/81.6lbs
Net Weight: 32.5kg/71.7lbs
Package Included
1*Convection Oven
1*English Manual
Notes
1. For the safety of the experiment, please install the external grounding device, and select the power supply matching the equipment to install the leakage protection device. The equipment is strictly forbidden to be used in the experiment of flammable, explosive, toxic and corrosive substances.
2. Place the equipment on a dry platform or the ground, and keep it more than 50cm away from the wall. Place the experimental items on the tray as needed, connect the power, turn on the switch, and set the required temperature according to the operating instructions of the intelligent instrument.
3. Please turn off the power when the equipment is not in use and keep it dry and clean.
4. Please read the manual completely before installation and use, and pay particular attention to the safety instructions included.
5. The temperature deviation in the working room is large after the fan is shut down. The fan should not be shut down without special circumstances.