Cart 2 india

Specification
Brand : The Amazing Tile And Glass Cutter
BulletPoint1 : 1 1/4 In Diamond Core Drill Bit Has 1 1/4-11 Unc Thread Same Thread As A Small Angle Grinder Thread. This 1 1/4" Diameter Diamond Hole Saw Can Drill Holes15 Inches Deep / Long This 1 1/4" Masonry Drill Bit Is Also Available In 6" Deep Version.
BulletPoint2 : This 1 1/4 Inch Diamond Drill Bit Is Best Used As A Wet Core Bit For Drilling Concrete And Brick. these Hollow Core Drill Bits Are A Wet Core Drill Bit And Should Be Kept Cool At All Times. Remove 1 1/4 Diamond Bits From Hole Every So Often And Allow Water To Cool Inside The Hole And To Get To The 1 1/4 Core Hole Drill Diamond Cutting Edge.
BulletPoint3 : Diamond Core Drills Have A 5/8-11 Unc Thread And The Drill Bit Holder / Core Bit Adapter Is Not The Same As A Regular Hole Saw Adapter Thread So You Do Need A Special Core Drill Bit Adapter In Order To Use This It In An Electric Drill. Core Bit Adapters Are Available In An Extended Core Bit Adapter Or Standard Length Adapter, The Thread Size Must Be 5/8-11 Unc.
BulletPoint4 : Contents 1 Diamond Core Drill Bit 1 1/4 Inch X 15 Inch Long. these Hollow Core Diamond Drill Bits Are Both A Concrete And Brick Drill Bit, It Has No Center Drill So If You Need A Center Drill Make Sure The Core Bit Holder You Purchase Has A Hole To Take A Pilot Drill. Our Adapters Have A Hole Suitable For Tapered Shaft Pilot Drill Bits. Pilot Drills Can be removed once Drilling Started for easier Drilling.
BulletPoint5 : 17" Tapered Shaft Pilot Concrete Drill Bit Available Separately Has TCT Tip For Masonry. Smaller Diameter Core Bits Can Be Started At A 45 Degree Angle Then Slowly Brought Level Or Drill A Hole In A Piece Of Plywood And Use It As A Guide.
BulletPoint6 : WET OR DRY - recommended to use with handheld core drills (rotary mode only) or variable speed grinders
BulletPoint7 : ROTARY MODE ONLY - use on rotary mode only, please do not use hammer mode with our bits
CuttingAngleString : 45.0 degrees
ExternallyAssignedProductIdentifier : 8991085281571
ExternallyAssignedProductIdentifier1 : 799964008442
ExternallyAssignedProductIdentifier2 : 0799964008442
ExternallyAssignedProductIdentifier3 : 00089634981022
FinishType : Diamond
FinishType1 : Titanium
FinishType2 : Steel
GpsrSafetyAttestation : 1
IncludedComponents : Bosch CAM008 8" SDS-max Core Bit Adapter
ItemName : 1 1/4" Diamond Core Drill Bit for Concrete x 16" Long with SDS Plus Adapter for SDS Drills with TCT Pilot Drill with Drift 5/8-11 UNC Thread Wet or Dry Cut Concrete Brick Cement Block Masonry
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 17.5 inches
ItemPackageDimensions_Width : 2 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : core-drill-bits
Manufacturer : The Amazing Tile And Glass Cutter
Material : Diamond
MfgSeriesNumber : TDBC12
ModelNumber : 98102
NumberOfFlutes : 2
NumberOfItems : 1
PartNumber : SDCBA5811X400X32SDS
ProductDescription : 1 1/4" in Diamond Core Drill Bit x 16" Long with SDS PLUS Adapter for SDS Drills with TCT Pilot Drill with Drift 5/8-11 UNC Thread 32mm x 400mm Wet or Dry Cut Concrete Brick Cement Block Masonry Products
ProductSiteLaunchDate : 2021-04-27T23:52:55.197Z
Size : 15). 1 1/4" Core Bit 15" Long + SDS Plus
Style : Includes SDS Plus Pilot Bit
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Stone
SurfaceRecommendation1 : Concrete
SurfaceRecommendation2 : Brick
SurfaceRecommendation3 : Masonry
UnitCount : 1
UnspscCode : 27111700