Cart 2 india

Specification
Brand : BSRTTOOL
BulletPoint1 : Packing:Dry Diamond Drill Bits 1-3/4inch
BulletPoint2 : Diameter 45mm, drilling depth 58mm,5/8"-11 Thread, total length 85mm
BulletPoint3 : Drilling the material. Concrete, granite, marble, stone, tile, Brick,Block,Mortar, etc.
BulletPoint4 : Usage: Firstly tilt 45¡ã to open the positioning slot, and then punch vertically, shaking while punching
BulletPoint5 : The spiral chip flute design at the cutting part of the cutting edge makes it easier to discharge the debris. Drilling with a rotary drill can significantly improve the drilling speed and efficiency.
ExternallyAssignedProductIdentifier1 : 780669730844
ExternallyAssignedProductIdentifier2 : 0780669730844
FinishType : Black Oxide
GpsrSafetyAttestation : 1
ItemName : BSRTTOOl Dry Diamond Drill Bits Hole for Stone Marble Granite Concrete Ceramic Brick Tile 1-3/4inch 5/8"-11 Thread -45mm
ItemPackageDimensions_Height : 2.16 inches
ItemPackageDimensions_Length : 3.93 inches
ItemPackageDimensions_Width : 2.16 inches
ItemPackageQuantity : 1
ItemTypeKeyword : core-drill-bits
Manufacturer : BSRTTOOl
Material : High Carbon Steel
ModelNumber : BSRT-ZT01054-5
NumberOfFlutes : 4
NumberOfItems : 1
PackageLevel : unit
PartNumber : BSRT-ZT01054-5
ProductDescription : The spiral chip flute design at the cutting part of the cutting edge makes it easier to discharge the debris. Drilling with a rotary drill can significantly improve the drilling speed and efficiency.
1 cm thick all-ceramic tiles, dry more than 30 holes!
-Shake while punching, faster
Discharge the debris and increase the punching speed.
:01 The faster the speed, the more the number of holes, the recommended speed is above 2600rpm!
:02It is not recommended to use rechargeable drills/ordinary impact drills/low-speed electric hand drills!
:03 It is forbidden to use vertical hard top and pressing hard, otherwise it will greatly reduce the service life!

How to use:
Install the hole opener on a hand drill or angle grinder. The hand drill needs to be equipped with a conversion chuck.
When drilling, the electric hand drill maintains a high rotation speed throughout the whole process, and tilts at 45¡ã, lightly against the tiles, the smaller the force, the less slippery it is, and the crescent-shaped positioning groove is punched out.
After drilling the positioning groove, slowly vertical the electric drill, and shake it while drilling, so that it is more convenient to discharge the debris and improve the drilling speed. It is forbidden to vertically hard top and press hard, otherwise it will greatly shorten the service life.
Note:
It is not recommended to use rechargeable drills/ordinary impact drills/low-speed hand drills!
It is forbidden to vertically hard top and press hard, otherwise it will greatly shorten the service life.
When drilling holes, please wear protective gloves, glasses, face shields, etc. to prevent splashed debris from entering your mouth, nose and eyes.
ProductSiteLaunchDate : 2021-07-12T08:03:17.835Z
Size : 1-3/4inch-45mm
Style : 1-3/4inch-45mm
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SurfaceRecommendation : 石
UnitCount : 1
UnspscCode : 20121600