Cart 2 india

Specification
Brand : JeeynoTols
BulletPoint1 : 【Size】1PC Diameter 4"(100mm), 5/8"-11 Thread,Total length 60mm,Max working depth 50mm, Diamond height 10mm, Diamond Grit #35/40
BulletPoint2 : 【Application】This Vacuum Brazed Diamond Drill Core Bit is Able to Dry Drill Through Porcelain, Tile, Granite, Marble, Stone, Masonry, Block, Brick, and Non-Reinforced Concrete
BulletPoint3 : 【Feature】Vacuum brazing technology makes the High-quality diamond grain firmly bonded to the matrix, and the diamond exposure is higher, the processing efficiency is higher, and the service life is longer
BulletPoint4 : 【Why choose】Special Designed with Hole in both Sides of Drill Bit for fast Removing Stone Chips and Improve drilling efficiency, and cool the workpiece and bit sooner
BulletPoint5 : 【Attention】Not Recommended for Concrete with Reinforcement.Do Not Use Core Drill Bits on Hammer Model.Recommended speed 3000RPM, maximum speed 6000RPM.
BulletPoint6 : Thin wall
BulletPoint7 : Use with SDS core bit shank 48-03-3555 (8 in.) or 48-03-3561 (12 in.)
Color : Orange
CompatibleMaterial : Stone
CuttingAngleString : 45.0 degrees
ExternallyAssignedProductIdentifier1 : 045242105359
ExternallyAssignedProductIdentifier2 : 0045242105359
ExternallyAssignedProductIdentifier3 : 00045242105359
FinishType : Diamond
GpsrSafetyAttestation : 1
IncludedComponents : Unit^Instruction Guide
ItemDisplayDimensions_Height : 4 inches
ItemDisplayDimensions_Length : 8 inches
ItemDisplayDimensions_Width : 4 inches
ItemName : JeeynoTol Dry Diamond Core Drill Bits 4"(100mm) - Diamond Hole Saw for Drilling Porcelain Ceramic Tile Granite Marble Masonry,5/8"-11 Thread Tile bit Title Tools
ItemPackageDimensions_Height : 10.795 centimeters
ItemPackageDimensions_Length : 6.9088 centimeters
ItemPackageDimensions_Width : 10.5918 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : core-drill-bits
Manufacturer : JeeynoTols
Material : Diamond
ModelNumber : 48-20-5040
NumberOfFlutes : 1
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : B061005801
ProductDescription : Recommended:
If fixed on Hand Drills,you could use Hex shank or Triangle shank Adapter to 5/8-11 thread.
If fixed on Hammer Drills,please use SDS plus shank Adapter to 5/8-11 thread.Also shut down hammer mode while using the diamond coated milling bit.
Other imoprtant tips:
When using diamond tools, there are several important factors to consider to ensure safe and effective usage.
Safety Gear: Always wear appropriate safety gear, including safety glasses or goggles, gloves, and a dust mask or respirator if necessary.
Proper Handling: Handle diamond tools with care, as they can be fragile and easily damaged.
Compatibility: Ensure that the diamond tools you're using are suitable for the material you're working on.
Mounting and Alignment: Follow our instructions for mounting and aligning the diamond tools correctly. Improper installation can lead to inefficient operation or even accidents.
Operating Speed: Be aware of the recommended operating speed for the diamond tools.
Cooling and Lubrication: Pay attention to the manufacturer's recommendations for cooling or lubricating the tool to prevent overheating and prolong its lifespan.
Pressure and Feed Rate: Apply the appropriate pressure and maintain a consistent feed rate when using diamond tools.
Operator Experience: It is essential to have experience or receive proper training before using diamond tools.
Regular Inspections: Before and after each use, inspect the diamond tools for any signs of damage or wear.Damaged tools should be replaced to avoid safety hazards.

ProductSiteLaunchDate : 2023-07-11T16:18:36.583Z
Size : 4"
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SurfaceRecommendation : Tile
SurfaceRecommendation1 : Stone
SurfaceRecommendation2 : Tile
SurfaceRecommendation3 : Masonry
UnitCount : 10
UnspscCode : 27111500