Cart 2 india

Specification
Brand : SHDIATOOL
BulletPoint : voltage: 240
BulletPoint1 : 1.Application: Dry/wet drilling for porcelain tile marble stone masonry brick normal stone
BulletPoint2 : 2. Machine: Connection With triangle shank for Hand Drill, Bench Drill and other machine need triangle shank
BulletPoint3 : 3. 5 Piece Diameter 3/8"(10mm), with triangle shank, Total height 65MM, Diamond height 10MM
BulletPoint4 : 4. Durablity:The inside of the drill bit is filled with dense cooling wax for cooling the diamond bits
BulletPoint5 : 5. High quality Diamond Grain and Vacuum Brazed technology provide much longer working life,fast and smooth drilling
Color : Silver
CuttingAngleString : 45.0 degrees
ExternallyAssignedProductIdentifier : 9303750616752
ExternallyAssignedProductIdentifier1 : 5027654536247
ExternallyAssignedProductIdentifier2 : 05027654536247
FinishType : Diamond
GpsrSafetyAttestation : 1
IncludedComponents : Pocket Hole Drill 9.5mm/0.37 Inch with Quick Release Shank x1
ItemName : SHDIATOOL Diamond Drill Core Bits 3/8 Inch for Porcelain Tile Marble Ceramic Granite Bricks 10mm Diamond Hole saws for Hand Drills 5 Pieces
ItemPackageDimensions_Height : 8.4074 centimeters
ItemPackageDimensions_Length : 1.4986 centimeters
ItemPackageDimensions_Width : 5.9944 centimeters
ItemPackageQuantity : 5
ItemTypeKeyword : core-drill-bits
Manufacturer : SHANGHAI DIATOOL CO., LTD.
Material : Artificial diamond and Steel body
Material1 : Diamond
Material2 : Carbide
ModelNumber : A8601010x5T
NumberOfFlutes : 2
NumberOfItems : 20
NumberOfPieces : 5
PackageLevel : unit
PartNumber : A8601010x5T
ProductDescription : ABOUT PRODUCTION:
SHDIATOOL 5 Pieces 3/8-Inch Vacuum Brazed Diamond Hole Bits with triangle shank

Quantity:
5-Piece 10mm Diamond Drill bits:

Specification:
Diameter 10mm, with triangle shank, Total height 65MM, Diamond height 10MM

Application :
Dry/wet drilling for porcelain tile marble stone masonry brick granite and all normal stones

Feature:
1.Fast and Smooth processing
2. Long lifetime
3. Less Chipping
4. Minimizing any breakage
5. Less loss of material
6. Less heat generation
7. Better finish quality
================THE END================

Operation Tips for Vacuum Brazed Diamond Drill core bits
1.Do not use these drill bits with hammer mode
2.Only fit these drill bits on a cord drill, not cordless drill(no enough power)
3.Only for tile drilling not recommend for the material behind the tile
4.For horizontal drilling,just give a gentle pressure
For vertical drilling, the weight of the machine will give sufficient pressure
5.Start drilling as per following instructions:
1) Place the drill at a 45 degree angle
2) Drilling till the hole start to form
3) Bring the drill up into upright position
4) Continue to drill and swaying the machine along a circle

ProductSiteLaunchDate : 2022-02-10T07:37:51.004Z
Size : 3/8"(10mm)
StreetDate : 2018-03-07T00:00:01Z
Style : Diamond Mortar Raking Bit
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Alloy Steel
SurfaceRecommendation1 : Stone
SurfaceRecommendation2 : Tile
SurfaceRecommendation3 : Cer
SurfaceRecommendation4 : Masonry
UnitCount : 5
UnspscCode : 27112800