Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Diamond Drill Bits: 16mm cutting diameter. Sintered diamond cutting edge contains diamond particles from inside to outside, to ensure that the edge is always sharp.
BulletPoint2 : Application: Can be dry or wet drilling. To prolong the using life, it is recommended to be used with water for cooling and lubrication. Drill accurate holes on concrete, masonry, hard brick, marble, stone, marble, glass, tile and other hard materials.
BulletPoint3 : Fit for Angle Grinder: Easily operate on the M10 Angle Grinder (not included here). Or need an adapter for drill or other machine, such as hex, round shank etc. (not included here). Cannot be used on impact power tools.
BulletPoint4 : Features: Large clearance hole facilitates the entrance of cooling water and the escape of chips and other particles from drilling. Makes drilling process much easier.
BulletPoint5 : Notices: When cutting holes, it needs to be positioned at an angle of 45 degree and make a crescent-shaped trace on the material. Then cut holes vertically and need to be cooled with water.
BulletPoint6 : WET OR DRY - recommended to use with handheld core drills (rotary mode only) or variable speed grinders
BulletPoint7 : ROTARY MODE ONLY - use on rotary mode only, please do not use hammer mode with our bits
Color : Silver
CompatibleMaterial : Metal
CuttingAngleString : 45.0 degrees
ExternallyAssignedProductIdentifier1 : 0810064970894
ExternallyAssignedProductIdentifier2 : 810064970894
ExternallyAssignedProductIdentifier3 : 00045242086887
FinishType : Diamond
GpsrSafetyAttestation : 1
IncludedComponents : Diamond Blade
ItemDisplayDimensions_Height : 14 inches
ItemDisplayDimensions_Length : 2 inches
ItemDisplayDimensions_Width : 2 inches
ItemDisplayWeight : 1 pounds
ItemName : uxcell 16mm Sintered Diamond Core Drill Bits Hole Saws, Dry or Wet Drilling for Brick Concrete Block Masonry Marble, for M10 Angle Grinder, 3 Pcs
ItemPackageDimensions_Height : 11.4 centimeters
ItemPackageDimensions_Length : 2.4 centimeters
ItemPackageDimensions_Width : 8.5 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : core-drill-bits
Manufacturer : uxcell
Material : Sintered Diamond, Carbon Steel
ModelNumber : # 10 Adapter DD200 to 1-1/4" AZ
NumberOfFlutes : 2
NumberOfItems : 1
NumberOfPieces : 3
PackageLevel : unit
PartNumber : a19120400ux0798
ProductDescription : Specifications:
Diameter: 16mm / 0.63"
Thread: M10
Drilling Depth: 49mm / 1.93"
Overall Length: 63mm / 2.48"
Tip Material: Sintered Diamond
Body Material: Carbon Steel
Fit For: Angle Grinder
Surface Treatment: Electrostatic Powder Coating
Main Color: Blue

Descriptions:
1. Diamond Core Drill Bits can be used for cutting holes in concrete, stones, bricks, blocks, masonry.
2. Can be Wet or Dry use. Used with water for cooling and lubrication can prolong its using life.
3. Easily operate on the Angle Grinder. Need an adapter for drill or other machine, such as hex, round shank etc. (not included here).
4. Large clearance hole facilitate the entrance of cooling water and the escape of chips and other particles from drilling. Makes drilling process much easier.

Package:
3 Pcs x Diamond Core Drill Bits
ProductSiteLaunchDate : 2021-09-02T08:05:03.909Z
Size : 16mm
Style : Compact
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredDgHzRegulation1 : not_applicable
SupplierDeclaredDgHzRegulation2 : not_applicable
SupplierDeclaredDgHzRegulation3 : not_applicable
SupplierDeclaredDgHzRegulation4 : not_applicable
SupplierDeclaredDgHzRegulation5 : not_applicable
SurfaceRecommendation : Stone
SurfaceRecommendation1 : Stone
SurfaceRecommendation2 : Tile
SurfaceRecommendation3 : Concret
SurfaceRecommendation4 : Masonry
UnitCount : 3
UnspscCode : 27111700