Cart 2 india

Specification
Brand : CAYKEN
BulletPoint1 : Designed for wet or dry core drilling.
BulletPoint2 : Comes with adjustable aluminum stand with vacuum plate.
BulletPoint3 : Will cut up to 20-inch diameter holes.
BulletPoint4 : For use on concrete, brick, stone, rock, ceramic, and fireproof materials.
BulletPoint5 : 1/4-inch water valve for wet drilling.
ExternallyAssignedProductIdentifier : 8023743004762
ExternallyAssignedProductIdentifier1 : 745528403963
ExternallyAssignedProductIdentifier2 : 0745528403963
ItemDisplayDimensions_Height : 9 inches
ItemDisplayDimensions_Length : 22 inches
ItemDisplayDimensions_Width : 14 inches
ItemDisplayWeight : 36 pounds
ItemName : Cayken 20in. Diamond Core 7.2 HP Drill Rig with Adjustable Vacuum Plate Stand
ItemPackageDimensions_Height : 9 inches
ItemPackageDimensions_Length : 22 inches
ItemPackageDimensions_Width : 14 inches
ItemPackageQuantity : 1
ItemTypeKeyword : power-core-drills
Manufacturer : Cayken
Material : Metal
MaximumPower : 7.2 horsepower
ModelName : SCY-5050
NumberOfItems : 1
PartNumber : CK-SCY-5050-580F
PowerSourceType : Power Source
ProductDescription : Cayken 20in. Diamond Core 7.2 HP Drill Rig with Adjustable Vacuum Plate Stand

The Cayken SCY-5050 is designed for wet or dry core drilling and comes with the Cayken 580F adjustable aluminum stand with vacuum plate. This drill will cut up to 20-inch holes in reinforced concrete, brick, stone, rock, ceramic, and fireproof materials. This drill has a 7.2 HP motor with three (3) gear speeds. Spline is 1-1/4 in. x 7 TPI. Drill features safety clutch and overload protection. Package includes wrench set, two (2) motor brushes, and 1/4-inch water valve with shut off.

Drill Specifications:

Motor: 5,380 W, 7.2 HP, 110 V, 50-60 Hz

Three (3) Gear Speeds: 280 RPM, 420 RPM, and 540 RPM

Spline: 1-1/4 in. x 7 TPI

Drill Features:

Designed for wet or dry core drilling.

Will cut up to 20-inch diameter holes.

For use on concrete, brick, stone, rock, ceramic, and fireproof materials.

1/4-inch water valve for wet drilling.

Soft start electronic current limiter

Includes wrench set.

CE/ROHS/ISO90001 Certified.

Drill bit not included.

Cayken 580 Stand Specifications:

Adjustable aluminum stand for drilling at 0 to 60 degrees.

Base mounts with vacuum plate.

Built-in leveling bubble.

Four (4) adjustable slide bearings.

Larger mast designed to accommodate large-diameter bits and withstand high torque.

Angle/vertical position locks.

Four (4) leveling bolts on base.

Reversible slide handle for dual-side operation.

Top and rear handles.

Includes wrench set.


ProductSiteLaunchDate : 2017-04-02T12:35:49.361Z
Size : 3 Inch - FA75
Speed : 540 rpm
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 27112700
Voltage : 110 volts