Cart 2 india

Specification
Brand : Wicks Aircraft
BulletPoint1 : 4 piece spring back dimple die set, 100° countersink. Includes dies for 3/32” 1/8” 5/32” 3/16”.
BulletPoint2 : These dimple dies are designed to form a 100° countersink when working with thin aluminum or other soft metals when installing flush head rivets or other fasteners with a 100° head.
BulletPoint3 : A Dimple die set for sheet metal is typically used when flush fasteners are desired but the material is two thin to drill a countersink hole. Example 0.025" aluminum.
BulletPoint4 : A dimple die requires a hand or pneumatic rivet squeezer to form the dimple in the sheet metal. These dies fit most such squeezers and feature a 0.187" diameter shank.
BulletPoint5 : Spring back dimple dies are available in 4 separate sizes and as a 4 piece kit. If buying only one size make sure it fits the diameter of your fastener and that your fastener has a 100° head.
BulletPoint6 : THIS LISTING IS FOR THE DIMPLE DIE ONLY! RIVET SQUEEZERS ARE SOLD SEPERATELY!
Color : Silver
CuttingAngleString : 100.0 degrees
ExternallyAssignedProductIdentifier : 9489228803081
ExternallyAssignedProductIdentifier1 : 788703727218
ExternallyAssignedProductIdentifier2 : 0788703727218
FinishType : Polished
GpsrSafetyAttestation : 1
IncludedComponents : 3-Countersink Drill Bits
ItemName : 4 Piece Set Spring Back Dimple Die, 100° Countersink. 3/32” 1/8” 5/32” 3/16”. for Sheet Metal Fabrication. Fits Hand and Pneumatic Rivet Squeezers.
ItemPackageDimensions_Height : 1 inches
ItemPackageDimensions_Length : 1.5 inches
ItemPackageDimensions_Width : 1 inches
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : countersink-bits
Manufacturer : Wicks Aircraft and Motorsports
Material : Stainless Steel
Material1 : Stainless Steel
Material2 : High Speed Steel
Material3 : Brass
ModelNumber : TC-407
NumberOfFlutes : 4
NumberOfItems : 4
NumberOfPieces : 2
PartNumber : TC-407
ProductDescription : A Dimple die set for sheet metal is typically used where flush fasteners are desired but the material is to thin to drill a countersink hole. Example 0.025 inch thick aluminum. In this case a spring back dimple die is used to form an indentation in the metal that is the proper angle and depth for the fastener being used. 100 degree is standard for flush mount rivets and some other fasteners. If unsure check the angle of your head before purchasing a set of dimple dies or a countersink. That information should be available from the company the fasteners were purchased from. In may cases it will be listed in the item description. Spring back dimple dies are available in 4 separate sizes and as a 4 piece kit. If buying only one size make sure it fits the diameter of your fastener. THIS LISTING IS FOR THE DIMPLE DIE ONLY! RIVET SQUEEZERS ARE SOLD SEPERATELY!
ProductSiteLaunchDate : 2023-11-24T16:17:39.040Z
Size : Set of 4 Dimple Dies
Style : 5 Pcs Countersink Drill Bit Set
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
SurfaceRecommendation : Aluminum, Metal
SurfaceRecommendation1 : Plastic
SurfaceRecommendation2 : Metal
SurfaceRecommendation3 : Wood
SurfaceRecommendation4 : Copper
SurfaceRecommendation5 : Alloy Steel
SurfaceRecommendation6 : Aluminum
SurfaceRecommendation7 : Brass
SurfaceRecommendation8 : Cast Iron
UnitCount : 1
UnspscCode : 31161500