Cart 2 india

Specification
Brand : HOHXEN
BulletPoint1 : The woodworking drill is made of HSS 4241, the middle chamfer drill body is NO. 45 steel. Chamfer diameter: 15.8 mm.4 Sizes in one drill bit set(3mm/ 4mm/ 5mm/ 6mm), which meet your different needs perfectly..Specially designed for sleeve countersinks or bores pilot holes.
BulletPoint2 : By loosening and tightening the setscrew with a wrench(included), the counter sleeve depth and drilling depth can be easily adjusted for screws of various lengths.
BulletPoint3 : Drilling length can be adjusted for various length screws simply loosening and tightening the setscrews.
BulletPoint4 : 5-flute chamfer can discharge the wood more quickly in the process of drilling, with smooth counterbore drilled at a time to save you time and labor. The surface of the workpiece will be perfectly embedded with screw cap.
BulletPoint5 : Compatible with drilling machines with chuck, for drilling on hard wood or wooden floor. It is recommended to use the center punch for position before drilling, keep the drill bit vertical to avoid the drill bit from bending or breaking.
Color : steel
CuttingAngleString : 90.0 degrees
ExternallyAssignedProductIdentifier : 6345319844612
ExternallyAssignedProductIdentifier1 : 8014249155133
ExternallyAssignedProductIdentifier2 : 08014249155133
FinishType : Polished
GpsrSafetyAttestation : 1
IncludedComponents : Packaging; Cutting Tools
ItemName : HOHXEN 4pcs Countersink Drill Bits with HSS Drill Bits and Steel 45 Chamfers for Screw Countersinking in Woodworking Project
ItemPackageDimensions_Height : 13.3 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 11.7 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : countersink-bits
Manufacturer : HOHXEN
Material : Carbide
ModelNumber : 19020214
NumberOfFlutes : 2
NumberOfPieces : 1
PartNumber : WJ-0059
ProductDescription : Specification:
Material: Three sharp woodworking drill high-speed steel 4241, in the middle chamfering drill body is 45 steel
Three-point drill diameter:
3 mm x 60 mm (length)
4 mm x 75 mm (length)
5 mm x 85 mm (length)
6 mm x 93 mm (length)
Chamfer diameter: 15.8 mm

Feature:
Special designed steel counter sleeve countersinks or counter bores pilot hole. Adjustable counter sleeve depth with wrench.
Drill and countersink for wood screws without changing bits.
Drilling length can be adjusted for various length screws simply by loosening and tightening the setscrew.
Chamfer is 5 flutes,In the process of using, can discharge the wood more rapid, sink hole disposable drilled smooth, screw cap perfect embedded in the surface of workpiece.

Benefits:
In many cases of woodworking projects, it's vital for appearance, safety and everyday use that the screw heads be perfectly level with, or even below, the surface of the lumber. The solution for these kinds of projects is to countersink your screws.
In the old way of countersinking, you need to select a drill bit that is the same diameter as the shafts of your screws, and a second drill bit that is the same diameter as the heads of your screws. It¡¯s also tricky to control the depth of the holes.
With this Migiwata 2-in-1 countersink drill bits set, the job will be quite easy. One bit can finish drilling and countersinking for wood screws. Drilling depth can be adjusted for various screws simply by loosening and tightening the setscrew with an Allen wrench.

Package included:
4 x Woodworking chamfer
1 x Hex key
ProductSiteLaunchDate : 2018-04-23T07:00:00.000Z
StreetDate : 2016-11-06T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Alloy Steel
UnitCount : 1
UnspscCode : 27112800