Cart 2 india

Specification
Brand : TOOLSTAR
BulletPoint1 : Material- High speed steel with a brass body designed, durable and excellent for use.
BulletPoint2 : Design: Positioning accuracy, not to shift, the chips automatic discharge from the hole on both sides of the tip of the drill, not stuck drill.
BulletPoint3 : Bit is in a self-centering design, these self-centering drills put stop right where they should be in the middle.
BulletPoint4 : Size: 5/64" 7/64",9/64" 11/64", 5mm, 13/64"，1/4"; all are 1/4" hex shank.
BulletPoint5 : 7 of the most commonly used sizes for carpenter, cabinet, furniture manufacturer and other woodworking trades.
Color : Silver
CuttingAngleString : 1/4 inches
ExternallyAssignedProductIdentifier1 : 0784104226824
ExternallyAssignedProductIdentifier2 : 784104226824
FinishType : Brass
FinishType1 : Titanium
FinishType2 : Zinc
ItemName : TOOLSTAR Center Drill Bit Set, 7PCS Hinge Drill Bit Set Hex Shank Self Centering Hinge Drill Bit Door Cabinet Pilot Hole Drilling Tool - 5/64" 7/64",9/64" 11/64", 5mm, 13/64"，1/4"
ItemPackageDimensions_Height : 15 millimeters
ItemPackageDimensions_Length : 70 millimeters
ItemPackageDimensions_Width : 30 millimeters
ItemPackageQuantity : 1
ItemTypeKeyword : countersink-bits
Manufacturer : TOOLSTAR
Material : Brass shell, HSS core, Exterior Plating
ModelNumber : HURRICANE
NumberOfFlutes : 2
PartNumber : HD0758
ProductDescription :

Description:

Material: Brass + high-speed stee Hole
4pcs Sizes:5/64" 7/64",9/64" 11/64", 5mm, 13/64"，1/4"
Color: silver
Appearance: Electroplating
Type: center Drill Bit

Size:

5/64 : Hole diameter is about 2mm, Use about 2.2 - 2.8mm tapping screw
7/64 : Hole diameter is about 2.8mm,Use about 3 - 3.5mm tapping screw
9/64 : Hole diameter is about 3.5mm,Use about 4 - 4.5 mm tapping screw
11/64 : Hole diameter is about 4.5mm,Use about 5 - 5.5 mm tapping screw
5mm: Hole diameter is about 5mm, Use about 5.5-6mm tapping screw
13/64'': Hole diameter is about 5.2mm, Use about 6-6.5mm tapping screw
1/4'': Hole diameter is about 6.35mm, Use about 7-7.5mm tapping screw

Features:

The Shank of the stainless steel drill is 1/4'' inch.
Suitable for the wood window or door tapping.
Fast replacement composite cone, uses drill edged principle.
Drilling and tapping, high working efficiency.
High hardness, rustproof, solid and durable.
Positioning accuracy, will not shift, the chips automatic discharge from either side of the top of the drill hole, don't stick drill.
- They come in the 3 most common hinge screw sizes 7/64",9/64", & 11/64".
- The 7/64" is good for drilling holes in smaller hinges and hardware like decorative boxes.
- The 9/64" is ideal for medium to full-size hinges and hardware.
- The 11/64 is perfect for door hinges, gate locks and all large hardware.

Package Content:

4pcs x Self Centering Hinge Drill Bit

ProductSiteLaunchDate : 2020-09-01T02:55:21.353Z
Size : 5/64" 7/64",9/64" 11/64", 5mm, 13/64"，1/4"
SupplierDeclaredDgHzRegulation : not_applicable
SurfaceRecommendation : Steel,Brass
UnitCount : 1
UnspscCode : 31162403