Cart 2 india

Specification
AirFlowCapacity : 1.09 cubic_feet_per_minute
Brand : DORHEA
BulletPoint : ZHAWULEEFB Replacement New CPU Cooling Fan for Schenker XMG NEO 15 17 Tongfang GK5CQ7Z EG50060S1-C380-S9A THER7GK5C6-1411 EG50060S1-C380-S9A DC5V 2.25W
BulletPoint1 : The active cooler combines a large metal heatsink with a high-quality variable-speed blower fan, powered and controlled via the fan connector on the Raspberry Pi 5, attached to the board via sprung pins into the dedicated pair of mounting holes.
BulletPoint2 : The raspberry pi active cooler provides an alternative cooling solution for raspberry Pi 5 under sustained heavy load, If you want to use for raspberry pi without a case to withstand continuous heavy load work without throttling, you can choose to install an active cooling cooler.
BulletPoint3 : As the heat from the Pi 5 CPU spreads across the heatsink body and fins, the blower fan pushes cool air over them to keep your Raspberry Pi 5 running at optimal thermal levels.It pushes air to cool the fin-type aluminum heat sink.
BulletPoint4 : Variable speed fan (software/temperature controlled)
BulletPoint5 : Compatible with raspberry pi 5
CompatibleDevices : Raspberry Pi 5
CoolingMethod : Air
ExternallyAssignedProductIdentifier1 : 0687117743961
ExternallyAssignedProductIdentifier2 : 687117743961
IncludedComponents : cpu+gpu fan
ItemName : for Raspberry Pi 5 Active Cooler Fan Heatsink Aluminum Speed Adjustable PWN Cooling Fan Heat Sink Radiator Speed Control for Raspberry Pi 5 - Black
ItemPackageDimensions_Height : 0.3 inches
ItemPackageDimensions_Length : 1.9 inches
ItemPackageDimensions_Width : 0.7 inches
ItemPackageQuantity : 1
ItemTypeKeyword : computer-internal-cpu-fans
Manufacturer : DORHEA
Material : Aluminum
Material1 : Metal
Material2 : Plastic
MaximumRotationalSpeed : 8000 rpm
ModelNumber : black
NoiseLevel : 31.5 decibels
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : DAD12113-1
PowerConnectorType : 4-Pin
ProductDescription : Type: Active cooler fan
Cooling type: Active
Fan voltage: DV 5V, powered via the four-pin fan header for raspberry pi 5
Air volume: 1.09 CFM
Fan speed: 8000 RPM +/-15%
Control mode: Support pwm speed regulation
Fan speed control: Pulse width modulation cControl with tachometer
Pre-coated thermal pads for heat transfer
Spring-loaded push pins for mounting for Raspberry Pi 5
Compatible with: for raspberry pi 5

Installation method:
1. Take out the active cooler active radiator from the packaging box
2. Remove the protective film from the silicone thermal pad at the bottom of the product
3. Carefully place the active cooler in the correct location on the Raspberry Pi5, making sure not to touch any connectors
4. It connects to the circuit board via two new mounting holes and connects to the same 4-Pin JST connector header as the case fan

Package include:
1 x Pi active cooler fan

ProductSiteLaunchDate : 2024-04-13T03:02:53.593Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 43201619
Voltage : 5 volts
Wattage : 2.5 watts