Cart 2 india

Specification
Brand : SimpMyloobe
BulletPoint1 : 【Professional-Grade Durability】Constructed with premium multilayer board and stainless steel columns, this foam cutting machine is built to withstand heavy use with rust-resistant and wear-resistant properties that ensure long-lasting performance in any workshop.
BulletPoint2 : 【Instant Heating for Maximum Efficiency】The advanced electric heating wire reaches optimal cutting temperature in just 0-5 seconds, allowing you to make smooth, precise cuts through foam materials quickly - dramatically improving your workflow efficiency.
BulletPoint3 : 【Precision Cutting System】Featuring four-sided measurement scales and an ultra-thin 0.01" heating wire, this machine delivers exceptional cutting accuracy with minimal material waste, perfect for creating professional-quality foam products.
BulletPoint4 : 【Fully Adjustable for Custom Projects】With adjustable temperature (32°F-572°F), cutting height, width, and circle radius, plus angle-adjustable supports, you can effortlessly create cones, cylinders, squares, and other complex shapes for any DIY or professional application.
BulletPoint5 : 【User-Friendly Workspace】The spacious 15.35"×12.99" work surface accommodates both beginners and professionals, while the simple assembly and easy-to-clean design make maintenance effortless after each use.
Color : Light Blue, Silver
ExternallyAssignedProductIdentifier1 : 0763492605909
ExternallyAssignedProductIdentifier2 : 763492605909
IncludedComponents : 1* Foam Cutting Machine 1* Power Adapter 1* English Manual Other Accessories for Assembly
ItemDisplayDimensions_Depth : 12 centimeters
ItemDisplayDimensions_Diameter : 5 centimeters
ItemDisplayDimensions_Height : 4 centimeters
ItemDisplayDimensions_Length : 12 centimeters
ItemDisplayDimensions_Width : 5 centimeters
ItemDisplayWeight : 100 grams
ItemName : Hot Wire Foam Cutter Table, Desktop Pearl Cotton Cutting Machine with Foot Control Pedal, for Cutting Forming and Sculpting Styrofoam and Other Foam Materials, Light Blue+Silver
ItemPackageDimensions_Height : 15.35 inches
ItemPackageDimensions_Length : 17.52 inches
ItemPackageDimensions_Width : 4.53 inches
ItemPackageQuantity : 5
ItemTypeKeyword : craft-shears
Manufacturer : SimpMyloobe
MasterPackLayersPerPalletQuantity : 1
MasterPacksPerLayerQuantity : 1
Material : Multilayer Board, Stainless Steel, Aluminum Alloy
ModelName : YSR2694
ModelNumber : YSR2694
PartNumber : YSR2001
ProductDescription :

Description

Our foam cutting machine injects new efficiency and convenience into your creative process, saving valuable time and energy dramatically. It reshapes the boundaries of creativity with precise temperature control and diverse adjustable designs. Simple operation allows ideas to be realized immediately. By choosing this product, you are embracing a more efficient, precise and innovative approach full of endless possibilities.

Details

Rubber Foot Pads: They can be slightly adjusted to ensure stability while protecting the table from being scratched.

Guide Ruler: The stainless steel guide ruler can help you make straight cuts.          

LED Display: The adapter has an LED display that shows the voltage value in real-time for better control of the cutting process.

Wire Storage Wheel: The large wire storage wheel can store up to about 65.61ft of heating wire, so you can finish your cutting work without having to replenish the wire frequently.

Application

It can be used to cut foam, sponge, pearl cotton, ribbon, KT board, etc. It can cut angles, cylinders, sharp cones, rings, cones, straight lines, and other shapes.                                            

How to Install

1.Take out the semicircular angle board, align two holes on the angle board with two holes on the worktable, and tighten them with screws.

2.Take out the L-type stainless steel square pipe support, and align two holes on the pillar with two holes on the angle board. Put on the bolt, cover the copper nose (copper nose is conductive zero line, and very important), and tighten the nut.

3. Pull out the heating wire about 11.81in from the wire wheel.

4.Thread the heating wire through the small hole of the worktable, and then make a ring on the heating wire and hang it on the spring at the machine's bottom. It should not fall off.

5.Rotate the aluminum alloy wire wheel on the bracket to tighten the heating wire. The heating wire is moderately tight and naturally elastic.

Specification 

Material: Multilayer Board, Stainless Steel, Aluminum Alloy

Color: Light Blue, Silver

Mount Type: Countertop

Assembly Required: Yes

Plug Type: US Standard

Power Supply: Corded Electric

Adapter Input: 100-240V

Voltage: 18V    

Power: 72W

Preheating Time: 0-5 Seconds

Cutting Height: 0-25cm/0-9.84 in

Cutting Width: 0-28cm/0-11.02in

Cutting Diameter: 0-10cm/0-3.94in

Adjustable Bracket Angle Range: 0-180°

Power Cord Length: 222.5cm/87.6in 

Heating Wire Diameter: 0.28mm/0.01in

Adjustable Temperature Range: 0~300℃/32~572℉

Workboard Size: 39*33cm/15.35*12.99in 

Package Size: 44.5*11.5*39cm/17.52*4.53*15.35in

Gross Weight: 3.3kg/7.27 lbs

Net Weight: 3kg/6.61 lbs

Package Included

1* Foam Cutting Machine

1* Power Adapter

1* English Manual

Other Accessories for Assembly

Notes

1.Please read the manual completely before installation and use.

2.Please do not touch the heating wire of the cutting machine when the power is on. Please keep a certain distance from the heating wire. If necessary, wear gloves to avoid scalding. The heating wire should not be too red, otherwise, it is easy to break, and the life of the adapter will be affected.

3.Please use the product in a ventilated environment. It is not advisable to allow small children to play with this machine.

4.Please turn off the power when the product is not in use. Long-time idle burning may cause damage to the machine.

5.Please note that it is not suitable for fireproofing materials. When cutting, the cutting wire temperature is high, and attention should be paid to keeping away from flammable and explosive products.

6.Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering. 

ProductSiteLaunchDate : 2025-04-18T08:12:28.722Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 27112700
Wattage : 72 watts