Specification ArtCraftKitType : Model Building Brand : PATIKIL BulletPoint1 : Color: Blue, Material: Metal, Stainless Steel, Voltage: 110V-240V, Power (Cutting Pen): 30W, Power (Power Adapter): 30W, Plug: US plug, DC Plug: 5.5 x 2.1MM / 0.22 x 0.08 Inch, Metal Pen Length: 15CM / 5.9 Inch, Total Length: 30CM /11.8 Inch, Packing List: 1 x Foam Cutting Pen, 1 x Start Switch, Power Adapter BulletPoint2 : Advantage: The foam cutter heats evenly preheat quickly, and can be heated to 210°C within 10 seconds. Non-slip Insulating Rubber Handle: The non-slip rubber handle and the electric heating pen are lightweight, so your hands will not be tired after a long time of cutting work. The stainless steel heating thin tube is corrosion-resistant and high-temperature resistant and can adapt to a variety of heating environments. BulletPoint3 : Instruction: Step 1. Connect and switch on the power adapter. Step 2. Turn the switch on and wait for the temperature to rise to the usage temperature. Step 3. Aim at the foam that needs to be cut, press down slowly, and move slowly along the line that needs to be cut. Step4. After cutting, turn off the switch and wait for the foam cutter to cool down. (Recommended to rest for more than half an hour after 30 minutes of use.) BulletPoint4 : Application: It can cut foam smoothly and quickly, and the corner cutting is also neat and clean. It is suitable for small craft model making, advertising font production, DIY hand model making, etc. BulletPoint5 : NOTE: The heating tube can also be bent, but a pen can only be bent once, and it cannot be straight again after bending; and it cannot be bent repeatedly at the same point, otherwise it may cause the break. Color : Blue IncludedComponents : Foam Cutting Pen, Start Switch, Power Adapter ItemName : PATIKIL 15CM 30W 110V-240V Foam Cutting Pen Set, Electric Hot Foam Cutter Pen Cutting Tool with Start Switch & 24W Power Adapter for DIY Art Craft, Blue ItemPackageDimensions_Height : 26.4 centimeters ItemPackageDimensions_Length : 5.5 centimeters ItemPackageDimensions_Width : 7.3 centimeters ItemPackageQuantity : 1 ItemTypeKeyword : craft-shears Manufacturer : PATIKIL Material1 : Metal Material2 : Stainless Steel Material3 : Cotton NumberOfBoxes : 1 NumberOfPieces : 3 PartNumber : pta230805tt000465 ProductDescription : The foam cutting pen can cut foam smoothly and quickly, and the corner cutting is also neat and clean. It is suitable for hand-made foam, small craft model making, advertising font production, DIY hand model making, etc.
Specification Color: Blue Material: Metal, Stainless Steel Voltage: 110V-240V Power (Cutting Pen): 30W Power (Power Adapter): 24W Plug: US plug DC Plug: 5.5 x 2.1MM / 0.22 x 0.08 Inch Metal Pen Length: 15CM / 5.9 Inch Total Length: 30CM /11.8 Inch Packing List: 1 x Foam Cutting Pen, 1 x Start Switch, Power Adapter
Advantage The foam cutter heats evenly preheat quickly, and can be heated to 210°C within 10 seconds. Non-slip Insulating Rubber Handle: The lightweight heating pen with a non-slip rubber handle will let you not be tired after a long time of cutting work. The stainless steel heating thin tube is corrosion-resistant and high-temperature resistant and can adapt to a variety of heating environments. Suitable for cutting medium and low-density foam, pearl cotton, foam board, non-woven fabrics, woven bags, etc.
Instruction Step1. Connect and switch on the power adapter. Step2. Turn the switch on and wait for the temperature to rise to usage temperature. Step3. Aim at the foam that needs to be cut, press down slowly, and move slowly along the line that needs to be cut. Step4. After cutting, turn off the switch and wait for the foam cutter to cool down. Recommended to rest for more than half an hour after 30 minutes of use.
NOTE: The heating tube can also be bent, but a pen can only be bent once, and it cannot be straight again after bending; and it cannot be bent repeatedly at the same point, otherwise it may cause the break.