Cart 2 india

Specification
AgeRangeDescription : adult
Brand : easytooly
BulletPoint1 : Material: 316 Stainless Steel
BulletPoint2 : Connection: Female
BulletPoint3 : Technics: Forged
BulletPoint4 : Type: cross / 4 way
BulletPoint5 : For reactive, flammable, oxidizing gases and gas mixtures
Color : One Color
Department : Unisex Adult
ExternallyAssignedProductIdentifier : 8383787648903
ItemName : 316 Stainless Steel Female CROSS NPT 4 Way Connector 1/8" 1/4" 3/8" 1/2" 3/4" 3000psig 20MPa Pipe Fitting 1PC(1/8 inch)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : compression-cross-fittings
Manufacturer : easytooly
ModelName : easytooly
ModelNumber : easytooly
NumberOfBoxes : 1
NumberOfItems : 1
NumberOfPieces : 1
PartNumber : easytooly
ProductDescription : 316 Stainless Steel Female CROSS NPT 4 Way Connector 1/8" 1/4" 3/8" 1/2" 3/4" 3000psig 20MPa Pipe Fitting 1PC

Size Meaning
0.125 in -- 1/8"
0.25 in -- 1/4"
0.375 in -- 3/8"
0.5 in -- 1/2"
0.75 in -- 3/4"
1 in -- 1"
F means Female thread

Connection: Female
Technics: Forged
Type: cross / 4 way
Material: 316 Stainless Steel
Purity: max. 6.0

Application
For inert gas.
For reactive, flammable, oxidizing gases and gas mixtures, purity max. 6.0.
Pipe fittings also can be used for oils, water, liquids and steam.

Features
Excellent finish level to allow smooth flow transition.
Every pieces of elbows have radius junction to eliminate entrapment areas and to allow smooth flow transition.
Fine threads meets the requirement of ASME/ANSI B1.20.1 to ensure maximum thread engagement.
The hardened threads with smooth outside finishing avoid galling and help to extend the fitting service life.
Working pressures are higher than the traditional piping class.
Every fitting is marked with thread type, size and material.Material316 Stainless Steel,
Straight fittings are machined from bar stock and shaped fittings from forgings.

Thread Specifications
Pressure Rating for Pipe End Thread
Allowable pressure ratings for male and female threads are based on ASME B31.3 at ambient temperature.Installation InstructionPipe thread sealant is recommended for a leak tight seal. PTFE tape is commonly used only for installation of the pipe fittings with male thread.
1. Make sure both male and female threads clean.
2. Warp PTFE tape clockwise from the first thread.
3. Two time of wrapping is recommended.
4. Don't overhang tape on the first thread as it might be entered the system.
5. Cut off excess tape.
Cautions
1. Do not loosen or tighten fittings when system is pressurized.
2. Alwa
ProductSiteLaunchDate : 2024-11-05T10:32:52.683Z
Size : 1/8 Inch
UnitCount : 1
UnspscCode : 40141700