Cart 2 india

Specification
Brand : SHIHUANI
BulletPoint1 : 1. Digital Multimeter:This power energy meter can measure and display voltage current active power energy frequency and power factor at the same time.with split current transformer,more convenient to install .
BulletPoint2 : 2. Overload Alarm function:Backlight and power will flash simultaneously to give an alarm when exceeding the preset value.You can preset power limit by yourself.
BulletPoint3 : 3. Automatic Data Storage Function:The last test data is stored automatically when the power supply abruptly lose. Don't worry about data loss due to sudden power outages.
BulletPoint4 : 4. One-touch Control:The button can be used to control the backlight,reset energy, preset power alarm limit.
BulletPoint5 : 5. HD Display:HD display, 180° viewing without dead angle, with backlight function, this power meter is clearly visible whatever day or night.
Color : Ct 600a
ExternallyAssignedProductIdentifier : 3041255616803
ItemName : SHIHUANI SDM-A Digital Ammeter, Slim Compact, LED Panel Meter(CT 600A,36X96MM_220-240V)
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : current-clamps
Manufacturer : SHIHUANI
ModelName : SHIHUANI
ModelNumber : SHIHUANI
NumberOfItems : 1
PartNumber : SHIHUANI
ProductDescription : General
Designed to monitorize current of electrical charge of any system.
Usage and Working Principle
Make the connections according to the diagram. Make the connections of current transformers used for ampermeter before the electrical chargewhich required to measure in the system.
Current transformers don't sense the current of electrical charge which connected before them. Put max 5A charge for SDM-A36, SDM-A48, SDM-A72 and SDM-A96 types. Otherwise, device might be damaged or might give error.
Push "menu" button when the power is on. Set the current transformer ratio by "up"-"down" buttons and re-push "menu" to record your setting. You can see the current of system.Current transformers which used for direct ampermeters are in the same box with device and current ratio is already fixed, in this case, there is no menu for record.
Maintenance
Switch off the device and release from connections. Clean the trunk of device with a swab. Don't use any conductor or chemical might damage the device.
Make sure device works after cleaning.
Warnings
Please use the device according to the manual.
Don't use the device in wet.
Include a switch and circuit breaker in the assembly.
Put the switch and circuit breaker nearby the device, operator can
reach easily.
Mark the switch and circuit breaker as releasing connection for device.
Specifications
Operating Voltage(Un)....: 150V - 270V AC
Operating Frequency.......: 50/60 Hz.
<;4VA
Operating Temperature..: -20°C.....+55°C
Measurement Range.......: 100mA - 5.5A
Measurement Precision..: ±%1
Display..................................: 20mm(96),14mm(72)
9mm(36 and 48)display
Connection Type..............: Plug-in terminal
Cable Diameter.................: 1,5mm²
Weight................................: Max. 220gr.
Panel Hole Sizes................: 91x91mm(96)
68x68mm(72)
46x46
ProductSiteLaunchDate : 2025-04-03T07:49:05.281Z
Size : 36X96MM_220-240V
UnitCount : 1
UnspscCode : 31162900