Cart 2 india

Specification
Brand : Radio Design Labs
BulletPoint : The ST-LCR1 provides double-pole, double-throw dry switching contacts and LED indicator for relay
ExternallyAssignedProductIdentifier1 : 813721011138
ExternallyAssignedProductIdentifier2 : 0813721011138
ItemName : 2 Radio Design Labs ST-LCR1 Logic Controlled Relay - Momentary
ItemPackageDimensions_Height : 2 inches
ItemPackageDimensions_Length : 2 inches
ItemPackageDimensions_Width : 4 inches
ItemPackageQuantity : 1
ItemTypeKeyword : current-monitoring-relays
Manufacturer : Radio Design Labs
Material : copper
NumberOfItems : 1
PartNumber : ST-LCR1
ProductDescription : Control Inputs:SLAVE terminal used as an input from remote push-button or switch turns on relay when that switch is on. Activation is by connecting this input to Ground. Input from other equipment???s open-collector output turns relay on when open-collector is on. Note: RDL switching STICK-ONs have open-collector outputs suitable for driving an ST-LCR1. 5V+ accepts 3.5 to 12 Vdc to turn on relay. Relay is on only when this control signal is applied. 24V+ accepts 12 to 35 Vdc to turn on relay. Relay is on only when this control signal is applied.Control Output:SLAVE terminal open-collector @ 25 mA suitable to drive indicators or slave LCRsSwitching Contacts:Double-pole, double-throwMaximum Switching Power:60 W (220 Vdc, 125 Vac, 2 A)Power Requirement:GROUND-REFERENCED, 24 to 33 Vdc @ 50 mA * * Assumes 20 mA max load at SLAVE outputAmbient Operating Environment:-10C to 55C
ProductSiteLaunchDate : 2012-08-19T23:20:25.993Z
UnspscCode : 53100000