Cart 2 india

Specification
Brand : Yetibei
BulletPoint1 : I2C stands for Inter Integrated Circuit Communication and is suitable for short distance communication on PCBs or components. You can try to slow down the I2C clock to 1KHz. Alternatively, you can use an active terminator like this.
BulletPoint2 : Easy to use. Connect it to the I2C bus at the beginning of the chain (if you don't have a long cable, you can also try it at the end of the chain). When the chip is turned on and activated, it monitors the SCL and SDA lines. When he sees them being pulled up by the I2C resistor, it will activate and give off some power to amplify them through the top power supply.
BulletPoint3 : You can now achieve faster data rates without the need for resistors and long cables. We could easily operate a 400 kHz OLED over a 3 metre long telephone line. For a 100 kHz shield, we even operate BME680 via a 100 foot long Ethernet (approx. 3000 pF return and return!) and use OLED to display sensor details.
BulletPoint4 : It can be operated at any bus voltage from 1.6V to 5.5V, with SCL speeds of up to 400KHz and cables up to 4000pF. No special firmware, software or configuration is required. Simply plug the power, grounding, SCL and SDA connectors into the bus and watch the rise time to magically transform the sawtooth shaft into a square wave.
BulletPoint5 : After-sales service: Thank you for your purchase. If you have any problem, please contact us at any time. We promise you a satisfactory solution within 24 hours.
BulletPoint6 : Remote learning feature with included IR sensor
BulletPoint7 : Slim, compact design with wall-mount bracket
ExternallyAssignedProductIdentifier1 : 0760606847002
ExternallyAssignedProductIdentifier2 : 760606847002
IncludedComponents : As shown in the packing list
ItemName : 10PCS MCP1703T-3302E/MB SOT-89 MCP1703 250 mA,16V, Low Quiescent Current
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 1 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : current-sense-amplifiers
Manufacturer : Yetibei
ModelNumber : LM224AN
MountingType : Wall Mount
NumberOfChannels : 3
NumberOfItems : 1
OutputPower : 60 watts
PartNumber : DZZP3689-10pcs-811-2243097091
ProductDescription :

Description:

1. Easy to use. Connect it to the I2C bus at the beginning of the chain (if you don't have a long cable, you can also try it at the end of the chain). When the chip is turned on and activated, it monitors the SCL and SDA lines. When he sees them being pulled up by the I2C resistor, it will activate and give off some power to amplify them through the top power supply.

2. You can now achieve faster data rates without the need for resistors and long cables. We have easily run a 400 kHz OLED over a 3 metre long telephone line. For a 100 kHz shield, we even have BME680 via a 100-foot Ethernet (approx. 3000 pF return and return!) and use OLED to display sensor details.

3. It can be operated at any bus voltage from 1.6V to 5.5V, with SCL speeds of up to 400KHz and cables up to 4000pF. No special firmware, software or configuration is required. Simply plug the power, grounding, SCL and SDA connectors into the bus and watch the rise time to magically transform the sawtooth shaft into a square wave.

Special feature:

Improve the conversion of the I2C bus rise time.

2>.Ensure the data integrity of multiple devices on the I2C bus.

3>.Wide supply voltage range: 1.6V to 5.5V

4>.Improve tolerance to low noise.

Operating frequency up to 400 kHz.

Automatic detection of standby mode with low power consumption.

7>.Shutdown at low (<5uA) supply current.

Do not charge bus when disabled or switched off.

Strong conversion limits pull-up current.

Parameters:

1>.Working voltage: DC 1.6V-5.5V

Size: 25 x 18 mm.

Package:

1>.1 x I2C extender active terminator.

ProductSiteLaunchDate : 2024-11-03T15:34:19.759Z
SpecificationMet : FCC
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 32101600