Cart 2 india

Specification
Brand : GODIYMODULES
BulletPoint1 : The I2S stereo DAC breakout cable matches perfectly with any I2S output audio interface.
BulletPoint2 : 3.3 - 5V and can be used to handle many different formats by setting both pins high or low.
BulletPoint3 : For inputs, you can use classic I2S (the default) or 16-bit, 20-bit or 24-bit left justified data.
BulletPoint4 : And you can set it up to take an input system/master clock, but we default-set it to just generate it for you.
BulletPoint5 : 2 Pcs LM386 Electret Microphone Amplifier Microphone Pickup Module DC4-12V
BulletPoint6 : Automatic gain, selectable max from 40dB, 50dB or 60dB
BulletPoint7 : Low Input-Referred Noise Density of 30nV/
BulletPoint8 : For Low THD: 0.04% (typ)
IncludedComponents : 2pcs
ItemName : 2PCS 3.3V - 5V DAC Module 1334 UDA1334A I2S DAC Audio Stereo Decoder Module Board for Arduino
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : current-sense-amplifiers
Manufacturer : GODIYMODULES
MaximumSupplyVoltage : 19 volts_of_direct_current
ModelNumber : Case-W10S-001
MountingType : Freestanding
NumberOfChannels : 2
NumberOfItems : 2
OutputPower : 900 watts
PartNumber : CJMCU-1334-002
ProductDescription :

Specification:

Material: Circuit Board, Electronic Component

Voltage: 3.3-5V

Size: app.3.6 x 2.6cm/1.42 x 1.02in

Color: Purple

The I2S stereo DAC breakout cable matches perfectly with any I2S output audio interface.

3.3 - 5V and can be used to handle many different formats by setting both pins high or low.

And DAC can process data immediately, and give you a clear, analog, stereo line level output.

It's even cool with for MCLK-less I2S interfaces such as for the Raspberry Pi (which it's ideal for), a built in PLL will generate the proper clock from the incoming signal.

For inputs, you can use classic I2S (the default) or 16-bit, 20-bit or 24-bit left justified data.

And you can set it up to take an input system/master clock, but we default-set it to just generate it for you.

So you only need to connect Data In, Word Select (Left/Right Clock) and Bit Clock lines. If you want, there's a mute pin and a de-emphasis filter you can turn on.

Package includes:

2 x Decoder Module

2 x Pin Header

ProductSiteLaunchDate : 2024-12-24T07:27:15.608Z
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnspscCode : 43210000
Voltage : 14 volts_of_direct_current