Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : Product name : PNP silicon Transistor; quantity : 50â±2 percent pcs; model : A1015
BulletPoint2 : Package : to-92; collector base Voltage : 50V
BulletPoint3 : Collector current : 0. 1A; collector dissipation : 0. 45W
BulletPoint4 : Pin Size : 14 x 1mm/ 0. 55" x 0. 039" ( L* Pitch); body dimension : 18 x 4 x 3mm/ 0. 7" x 0. 16" x 0. 12" (l*w*t)
BulletPoint5 : Weight : 10G; package content : 50 x silicon PNP Transistor
BulletPoint6 : Automatic gain, selectable max from 40dB, 50dB or 60dB
BulletPoint7 : Low Input-Referred Noise Density of 30nV/
BulletPoint8 : For Low THD: 0.04% (typ)
ExternallyAssignedProductIdentifier1 : 700836813477
ExternallyAssignedProductIdentifier2 : 0700836813477
IncludedComponents : 2pcs
ItemName : Uxcell a12103100ux0061 TO-92 Plastic Encapsulate PNP Transistors A1015, 50 Piece
ItemPackageDimensions_Height : 0.762 centimeters
ItemPackageDimensions_Length : 16.51 centimeters
ItemPackageDimensions_Width : 10.16 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : current-sense-amplifiers
Manufacturer : Uxcell
Material : silicon
MaximumSupplyVoltage : 19 volts_of_direct_current
ModelNumber : a12103100ux0061
MountingType : Freestanding
NumberOfChannels : 2
NumberOfItems : 1
OutputPower : 900 watts
PartNumber : a12103100ux0061
ProductDescription :

Specification:

Material: Circuit Board, Electronic Component

Voltage: 3.3-5V

Size: app.3.6 x 2.6cm/1.42 x 1.02in

Color: Purple

The I2S stereo DAC breakout cable matches perfectly with any I2S output audio interface.

3.3 - 5V and can be used to handle many different formats by setting both pins high or low.

And DAC can process data immediately, and give you a clear, analog, stereo line level output.

It's even cool with for MCLK-less I2S interfaces such as for the Raspberry Pi (which it's ideal for), a built in PLL will generate the proper clock from the incoming signal.

For inputs, you can use classic I2S (the default) or 16-bit, 20-bit or 24-bit left justified data.

And you can set it up to take an input system/master clock, but we default-set it to just generate it for you.

So you only need to connect Data In, Word Select (Left/Right Clock) and Bit Clock lines. If you want, there's a mute pin and a de-emphasis filter you can turn on.

Package includes:

2 x Decoder Module

2 x Pin Header

ProductSiteLaunchDate : 2013-03-20T04:13:00.015Z
SupplierDeclaredDgHzRegulation : unknown
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 1
UnspscCode : 32000000
Voltage : 14 volts_of_direct_current