Cart 2 india

Specification
Brand : JANSANE
BulletPoint1 : This SCT-013-000 ac current sensor used for measuring alternating current, particularly used for whole building consumption or generation.
BulletPoint2 : This split core current transformer is particularly suitable for DIY use and it works well with arduino and raspberry pi.
BulletPoint3 : Use this 100a current sensor to build your own energy monitor, reducing your power usage, or use it build an over-current protection device for an AC load.
BulletPoint4 : Input Current: 100a AC; Length of Leading Wire: 1m; Two Form of Output: current output or voltage output (burden resistor needed to add); Cable Jack: 3.5mm (like a headphone jack).
BulletPoint5 : Suitable for lighting equipment, AC motors, air compressors, monitoring, current measurement and over-current protection.
Color : 30A
ExternallyAssignedProductIdentifier : 6921407352148
ExternallyAssignedProductIdentifier1 : 711102557889
ExternallyAssignedProductIdentifier2 : 0711102557889
ItemName : JANSANE SCT-013-000 100A Non-invasive AC Current Sensor Split-Core Clamp Current Transformer
ItemPackageDimensions_Height : 8.1026 centimeters
ItemPackageDimensions_Length : 2.6924 centimeters
ItemPackageDimensions_Width : 6.4008 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : electronic-component-current-sensors
Manufacturer : JANSANE
Material : Copper
Material1 : lead
Material2 : copper
Material3 : ferrite
ModelNumber : SCT-013-000
NumberOfItems : 1
PartNumber : MD-D1085 Series
ProductDescription : Specification
Model: SCT-013-000
Core Material: Ferrite
Input Current: 100a AC
Leading Wire in Length: 1.5m
Opening Size: 0.51 * 0.51inch / 13 x 13mm
Turns Ratio: 1: 1800
Resistance Grade: Grade B
Max Sampling Resistance: 10 Ω
Linearity: ±3%
Accuracy: ±1%
Work Frequency: 50-1 KHz
Work Temperature: -25˚C ~ 70˚C
Reference project: Open Energy Monitor
Dielectric Strength: 6000V AC/1min
Two Form of Output: current output or voltage output (voltage output built-in the sampling resistor);
Mechanical strength: opening and closing times, no less than 1000 times (20 ℃) High Quality and Safe: Meet the requirement of flame-retardant characteristics (UL94-V0)

ProductSiteLaunchDate : 2018-09-24T13:40:15.478Z
Style : +/-50Amp
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 39121000