Specification Amperage : 20 amps Brand : Veris Industries BulletPoint : Current Switches BulletPoint1 : Hawkeye 900 go/no go current switches provide a cost-effective solution for monitoring status on unit vents, exhaust fans, recirculation pumps, and other fixed loads where belt loss is not a concern BulletPoint2 : APPLICATIONS Monitoring on/off status of electrical loads Monitoring direct-drive units, exhaust fans, and other fixed loads Verifying lighting run times On/off status for direct-drive fans, pumps, and process motors BulletPoint3 : More reliable for status than relays across auxiliary contacts Ideal for direct-drive units, unit vents, fan coil units, exhaust fans, and other fixed loads CircuitType : 2-way Color : Black ConnectivityProtocol : X-10 ConnectorType : Auxiliary ControlMethod : touch CurrentRating : 50 amps Department : Unisex Adult ExternallyAssignedProductIdentifier : 9305536542989 ExternallyAssignedProductIdentifier1 : 078477682784 ExternallyAssignedProductIdentifier2 : 0078477682784 IncludedComponents : GSRA2 InternationalProtectionRating : IP54 ItemDisplayDimensions_Length : 1.5 inches ItemDisplayWeight : 0.48 pounds ItemName : Veris Industries H900 Hawkeye® 900 Split-Core Fixed Setpoint Digital Out ItemPackageDimensions_Height : 7 inches ItemPackageDimensions_Length : 7 inches ItemPackageDimensions_Width : 7 inches ItemPackageQuantity : 1 ItemTypeKeyword : current-switches LightType : led Manufacturer : Veris Material : Copper ModelName : ATIUHIFR ModelNumber : H900 MountingType : Panel Mount NumberOfBoxes : 1 NumberOfItems : 1 NumberOfPositions : 1 OperatingVoltage : 300 volts_of_alternating_current OperationMode : ON-NONE-OFF PackageLevel : unit PartNumber : H900 ProductDescription : Sensor Power Induced from monitored current Insulation Class 600VAC RMS (UL) 300VAC RMS (CE)Frequency Range 50/60 HzTemperature Range -15° to 60°C (5° to 140°F)Humidity Range 10-90% RH non-condensingTerminal Block Maximum Wire Size 14 AWG Terminal Block Torque (nominal) 4 in-lbs Agency Approvals UL 508 open device listing CE:EN61010-1:2001-02 CAT III deg. 2 basic insulationDo not use the LED status indicators as evidence of applied voltage.For applications requiring double or reinforced insulation please contact the factory. ProductSiteLaunchDate : 2013-04-27T01:16:14.237Z Size : 2 POSITION 1NO_LATCHING_110V SpecificationMet : UL Style : #N/A SupplierDeclaredDgHzRegulation : not_applicable SwitchType : Mechanical TerminalType : Screw UnitCount : 1 UnspscCode : 39122200 UpperTemperatureRating : 60 degrees_celsius Voltage : 250 volts Wattage : 455 watts