Cart 2 india

Specification
AgeRangeDescription : adult
Brand : LCGJZTPN
BulletPoint1 : This product is made of glass material by high temperature melt sintering.
BulletPoint2 : It can acid and alkali-resistant, corrosion-resistant, not unglued deformation, very durable.
BulletPoint3 : Base material: ABS
BulletPoint4 : Origin: Mainland China
BulletPoint5 : Product type: Lamp holder
Color : One Color
ExternallyAssignedProductIdentifier : 4159875953327
ItemName : Glass Cuvette (Liquid Sample Cell) 0.7 ml Light Path 2 mm Absorption Cells for Spectrophotometer Frit Sintering Technology 2/pk
ItemPackageDimensions_Height : 1 centimeters
ItemPackageDimensions_Length : 3 centimeters
ItemPackageDimensions_Width : 2 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : cuvettes
Manufacturer : LCGJZTPN
ModelName : JTSF9648
ModelNumber : LCGJZTPN
NumberOfBoxes : 1
NumberOfItems : 1
PartNumber : LCGJZTPN
ProductDescription : Glass Cuvette, Light Path 2 mm, 2 pieces
Material: Glass
Color: Both side transparent
Height: 45 mm
Outer dimension: 6 * 12.5 * 45 mm
Inner dimension: 2 * 10 * 44 mm
Light Path: 2 mm
Capacity: 0.7 ml
Package: 2/pkFeature:
This product is made of glass material by high temperature melt sintering. It can acid and alkali-resistant, corrosion-resistant, not unglued deformation, very durable.
Please pay attention when using:
1. When taking cuvette, please use finger contact with frosted glass on either side to avoid contact with the optical surface. Please pay attention to take light put, prevent the influence of the external force contrast cuvette, it will produce damage after stress.
2. When using cuvette, two translucent surfaces should be completely parallel and vertically placed in cuvette holder to ensure that incident vertical light is perpendicular to the translucent surface, it can avoid the loss of retroreflection of the light and ensure the optical path retention.
3. Optical surface can not contact with hard objects or dirt, when containing solution, the height is 2/3 of the cuvette. If the optical surface of residual liquid, please use filter paper to absorb clean, and then wipe with lens cleaning paper or silk.
4. Do not store corrosive glass solution in cuvettes for a long time. The cuvette should be rinsed with water immediately after use. If necessary, soak with 1: 1 hydrochloric acid, and then rinse with water. Do not put the cuvette on flame or electric stove for heating or put into drying oven to grill.
==========
Model Number : 2 mm
Origin : Mainland China
Classification : Petri Dish
Color : Transparent
Height : 45 mm
Outer dimension : 6 * 12.5 * 45 mm
Inner dimension : 2 * 10 * 44 mm
Light Path : 2 mm
Capacity : 0.7 ml
Package : 2/pk
ProductSiteLaunchDate : 2025-02-17T07:07:51.901Z
Size : One Size
UnitCount : 1
UnspscCode : 41120000