Cart 2 india

Specification
Brand : DKLECHUI
BulletPoint1 : Set includes 1 ounce bottle of medium viscosity (Insta-Cure + TM) Cyanoacrylate CA Super Glue 2 ounce bottle of Accelerator (Insta-Set TM).
BulletPoint2 : Insta-Cure+ is a BSI’s medium or higher viscosity CA glue used for loose fitting joints or filling small gaps.
BulletPoint3 : INSTA-SET (TM) is a catalyst which acts as an accelerator that allows CAs to fully cure in 6-8 seconds. INSTA-SET (TM) is formulated with a strawberry scent and activates CA without any degrading of the CAs strength. UN-CURE (TM) debonder will soften cured CA to clean up squeeze out, spills or for disassembly.
BulletPoint4 : CA glue comes with fine tip applicator
BulletPoint5 : 100% made in the USA!!
Color : clear
CompatibleMaterial1 : Rubber
CompatibleMaterial2 : Metal
ExternallyAssignedProductIdentifier1 : 737787285138
ExternallyAssignedProductIdentifier2 : 0737787285138
Hazmat1 : COMBUSTIBLE LIQUID, N.O.S., Combustible liquid, n.o.s
Hazmat10 : DE_Unregulated
Hazmat11 : EG_Unregulated
Hazmat12 : ES_Unregulated
Hazmat13 : FR_Unregulated
Hazmat14 : GB_Unregulated
Hazmat15 : IE_Unregulated
Hazmat16 : IN_GroundOnly
Hazmat17 : IT_Unregulated
Hazmat18 : JP_GroundOnly
Hazmat19 : MX_Unregulated
Hazmat2 : NA1993
Hazmat20 : NL_Unregulated
Hazmat21 : PL_Unregulated
Hazmat22 : SA_Unregulated
Hazmat23 : SE_Unregulated
Hazmat24 : SG_Unregulated
Hazmat25 : TR_CombustibleLiquid
Hazmat26 : US_CombustibleLiquidGround
Hazmat27 : ZA_Unregulated
Hazmat28 : 3
Hazmat3 : III
Hazmat4 : AE_Unregulated
Hazmat5 : AU_Unregulated
Hazmat6 : BE_Unregulated
Hazmat7 : BR_Unregulated
Hazmat8 : CA_CombustibleLiquidGround
Hazmat9 : CN_Unregulated
ItemForm : Spray
ItemName : BSI / Taytools Bob Smith Industries Combo Pack with 1 OZ Medium Viscosity Insta-Cure + TM Cyanoacrylate CA Super Glue and 2 OZ Accelerator Insta-Set TM
ItemPackageQuantity : 1
ItemTypeKeyword : cyanoacrylate-adhesives
ItemVolume : 29.5735 milliliters
Manufacturer : Bob Smith Industries BSI
Material : Cyanoacrylate
ModelNumber : 133H151H
PartNumber : 285138
ProductDescription : Insta-Cure+ is a BSI’s medium or higher viscosity CA glue for loose fitting joints or filling small gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ activator should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.. MAXI-CURE also bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. INSTA-SET is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.
ProductSiteLaunchDate : 2019-07-26T07:00:00.000Z
SafetyDataSheetUrl : http://bsi-inc.com/sds_pdf/sds_insta_cure_plus.pdf, http://bsi-inc.com/sds_pdf/sds_insta_set.pdf
SpecificUsesForProduct : Repair, Woodworking, Craft, Furniture, Wood, Tile Repair
SupplierDeclaredDgHzRegulation1 : storage
SupplierDeclaredDgHzRegulation2 : ghs
SupplierDeclaredDgHzRegulation3 : waste
UnitCount : 1
UnspscCode : 31201600
Viscosity : medium
WaterResistanceLevel : waterproof