Cart 2 india

Specification
Brand : Loctite
BulletPoint1 : Curing Method: UV Cure
BulletPoint2 : Color: Amber
BulletPoint3 : Application: Bonding Coating Sealing
BulletPoint4 : Material Compatibility: Glass Metal
BulletPoint5 : Acrylic Type: Acrylate
Color : light amber
CompatibleMaterial1 : Acrylic
CompatibleMaterial2 : Glass
CompatibleMaterial3 : Metal
CompatibleMaterial4 : Leather
ExternallyAssignedProductIdentifier1 : 051115252662
ExternallyAssignedProductIdentifier2 : 0051115252662
ExternallyAssignedProductIdentifier3 : 00051115252662
ItemForm : Liquid
ItemName : Loctite AA 352 UV-Cure Adhesive - 50 ml Bottle | Loctite 352 Amber One-Part Acrylic Adhesive - 50 ml Bottle - 35241
ItemPackageDimensions_Height : 8.89 centimeters
ItemPackageDimensions_Length : 1.016 centimeters
ItemPackageDimensions_Width : 1.524 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : cyanoacrylate-adhesives
ItemVolume : 50 milliliters
Manufacturer : Loctite
Material : Acrylate
ModelNumber : 79340352414
NumberOfItems : 1
PartNumber : 2003524
ProductDescription : LOCTITE AA 352 is a single component, high viscosity structural adhesive, it may be cured by UV light, heat or an activator, it is tough, flexible and highly resistant to vibration and impact forces. Clear/light amber color structural adhesive with UV, heat and activator cure. Creates a tough, flexible bond resistant to vibration and shock. LOCTITE AA 352 is suitable for bonding a wide range of materials. When cured, it is highly resistant to vibration and impact forces. LOCTITE AA 352 is used to bond, seal or coat metal and glass components in industrial applications. Typical uses include unitizing electrical devices, appliance parts and decorative components. Typical Use: Used to bond, seal, or coat metal and glass components in industrial applications. Typical uses include unitizing electrical devices, appliance parts, and decorative components. Key substrates are glass and metal. Heat Cure This product may be cured with heat. The bond area should be heated to 121°C and maintained at that temperature for 30 minutes. Activator Cure This product may be cured with an activator. Apply Activator 7075 to one surface and the adhesive to the other, mate and clamp. The assembly will reach handling strength in approximately 4 minutes if the gap is small, full cure in 72 hours Specifications: Clarity/Color: Clear/light amber Cure Type: Ultraviolet, heat, activator Key Substrates: Glass, metal Viscosity, cP: 19,500 Elongation at Break, %: 290 Shore Hardness: D 60 Temperature Range: -65°F to 300°F *****WARNING!*****WARNING!**** *WARNING!*****WARNING!**** *WARNING!*****WARNING! Hazardous Material - No Air Shipments. PRODUCT CANNOT SHIP VIA ANY TYPE OF AIR TRANSPORT, INCLUDING UPS NEXT DAY AIR, UPS 2ND DAY AIR, UPS 3 DAY SELECT, FEDERAL EXPRESS, PRIORITY MAIL, ETC. THIS PRODUCT MUST SHIP VIA GROUND TRANSPORTATION ONLY!!!
ProductSiteLaunchDate : 2008-07-05T19:47:03.000-00:00
SpecificUsesForProduct : Repair
StreetDate : 2017-06-01T00:00:01Z
TensileStrength : 3540 pounds_per_square_inch
UnitCount : 1
UnspscCode : 31201600
Viscosity : 19,500 cP
WaterResistanceLevel : not_water_resistant