Cart 2 india

Specification
Brand : Trinidad
BulletPoint : Sold by Case of 60 items
BulletPoint1 : Size: Diameter: 36mm (Thickness: 9mm)
BulletPoint2 : Storage: 10 chips
BulletPoint3 : Color: Pink
BulletPoint4 : Please check your model whether it is the same as the listing before purchasing. We do not accept responsibility if you purchase wrong products.Thank you!
Color : Pink
CompatibleDevices : adapter
ConnectorType : barrel connector
ExternallyAssignedProductIdentifier : 4573150350814
ExternallyAssignedProductIdentifier1 : 0791688554304
ExternallyAssignedProductIdentifier2 : 791688554304
FrequencyRange : 60 hertz
GpsrSafetyAttestation : 1
IncludedComponents : Mounting Hardware
IncludedComponents1 : Ball
IncludedComponents2 : Dartboard
IncludedComponents3 : Darts
InputVoltage : 240 volts
ItemName : Trinidad Accessories Trinidad da-tubo-dohoruda-
ItemPackageDimensions_Height : 16 centimeters
ItemPackageDimensions_Length : 1 centimeters
ItemPackageDimensions_Width : 10 centimeters
ItemPackageQuantity : 1
ItemShape : Round
ItemTypeKeyword : dartboards
Manufacturer : TRiNiDAD
Material : Natural Rubber
ModelName : Walker
ModelNumber : -
MountingType : Wall Mount
OutputVoltage : 240 volts
PartNumber : -
PowerSourceType : Corded Electric
ProductDescription : Recommended for mounting hardboards or softboards
Stable mounting of the board
The holder makes it easy to remove
Note: When installing screws on the board, please do not use anything other than the included screws.

■Installation method
1) Place the round parts for the board face in the middle of the board with 3 special short screws.
2) Use 6 long screws to install the wall parts in the 5 ft 8 inches (173 cm) position from the floor.
3) Slide the round part into the U section of the wall part from the top to secure it.
Please tighten the screws tightly.

Parts Contents:
1 x wall part, 1 x round board surface, 6 x wall mounting screws, 3 x board surface mounting screws.
Size (H x W): 3.5 x 3.9 inches (9 x

A screwdriver is required for installation (please prepare a screwdriver).
After installation, you can fix the board by filling the cardboard or other items between the back of the board and the mounting surface.
Different board will vary, please adjust it by yourself.
(M4 ISO) recommended by the manufacturer when installing on a gran board, please prepare 3 screws of the head size 0.3 inches (8 mm) x (total length 0.3 inches (8 mm)).

(From Amazon.co.jp)
ProductSiteLaunchDate : 2022-08-30T22:10:38.686Z
Size : 直径:36mm(厚さ:9mm)
SportType : Body Building
SupplierDeclaredDgHzRegulation : not_applicable
TargetGender : unisex
UnitCount : 1
UnspscCode : 60141000