Cart 2 india

Specification
Brand : GOTOTOP
BulletPoint1 : [Comprehensive Data] Provides alarm status, temperature statistics, and more.
BulletPoint2 : [High Capacity] Record up to 10,000 temperature points for thorough monitoring.
BulletPoint3 : [Accuracy Guaranteed] Adopts light and temperature sensor for precise readings.
BulletPoint4 : [Convenient Connection] Usb connector for quick data download to pcs.
BulletPoint5 : [Easy Setup] Super quick and software- online configuration.
IncludedComponents : No
ItemName : Temperature Data Logger, Single Use PDF Report USB Port 10000 Points with Light and Temperature Sensor for Cold Chain Monitoring
ItemPackageDimensions_Height : 2 centimeters
ItemPackageDimensions_Length : 10 centimeters
ItemPackageDimensions_Width : 9 centimeters
ItemTypeKeyword : industrial-data-loggers
Manufacturer : GOTOTOP
MeasurementAccuracy : 0.1mm
ModelName : GOTOTOPuim07yvqzw
ModelNumber : GOTOTOPuim07yvqzw
NumberOfItems : 1
PartNumber : GOTOTOPuim07yvqzw
ProductDescription : Specifications:
Color: As shown in the picture
How to use: single use
Accuracy: ±0.5°C (-20°C~+40°C); out of range, ±1°C
Data capacity: 10000
Alarm temperature range: 8°C (46.4°F)
Delayed record: 30 minutes
Working environment temperature: -30 ° C ~ +70 ° C
Power supply: 1 x CR 2032 button battery 150mAh (Built-in)
Equipment storage environment: recommended humidity 20 to 60% RH, temperature 10 to 50 °C
Instructions for use:
1. Press and hold the Start/Stop button for more than 3 seconds, the OK indicator will be on for 3 seconds.
2. During the recording process, the device will automatically light every 10s. If the normal indicator (green light) is lit every 10s, it means that the device is not over temperature during the recording process. If the alarm indicator (ie red light) is bright every 10s Once, it indicates that over-temperature has occurred during the recording process. Note: As long as over-temperature is found during the recording process, the green light will no longer illuminate.
3. If the device is over-temperature during recording, press the Start/Stop button. If the normal indicator (green light) is on, it indicates that the temperature is not over-recorded during the recording; if the alarm is When the indicator light (ie red light) is on, it indicates that the temperature is over temperature during recording.
4. Remove the packaging bag and insert the device into the computer USB interface. During the PDF file generation process, the normal indicator light (ie green light) and the alarm indicator light (ie red light) will turn on. When the file is generated, the normal indicator light (ie The green light will illuminate continuously until the recorder is removed from the computer.
Package List:
1 x Temperature Logger
ProductSiteLaunchDate : 2024-12-09T17:18:59.502Z
UnspscCode : 43201800