SpecificationBrand : NRC&XRC
BulletPoint1 : Bimini top hinged jaw slide clip for 7/8 inch tube,the detail size refer to the left picture
BulletPoint2 : Boat pipe clamp jaw slide with bimini pin and cam clamp made from 316 stainless steel
BulletPoint3 : Polished to a beautiful, mirror-like finish.
BulletPoint4 : Maximum corrosion resistance and durability in the saltwater environment.
BulletPoint5 : Boat rail hinge openning set up version not only for sliding bimini top hardwares
Color : For 7/8" Tube
CompatibleWithVehicleType : Boat
CustomerPackageType : Standard Packaging
Department : unisex-adult
ExternallyAssignedProductIdentifier1 : 699975908529
ExternallyAssignedProductIdentifier2 : 0699975908529
ExternallyAssignedProductIdentifier3 : 00086216213434
ExternallyAssignedProductIdentifier4 : 0097914426347
ExternallyAssignedProductIdentifier5 : 0630838005764
ExternallyAssignedProductIdentifier6 : 0687664855988
ExternallyAssignedProductIdentifier7 : 00630838005764
FitType : Universal Fit
FuelType : Gasoline
GradeRating : Commercial
Hazmat1 : PETROLEUM GASES, LIQUEFIED
Hazmat2 : UN1075
Hazmat3 : 2.1
ImportDesignation : Made in USA
IncludedComponents : Falcon FSH39BU Signal Horn - 3.9 oz.
InstallationType : Glue Down
ItemDisplayDimensions_Height : 2.5 inches
ItemDisplayDimensions_Length : 11 inches
ItemDisplayDimensions_Width : 6.4 inches
ItemDisplayWeight : 0.8 pounds
ItemForm : Strip" or "Trim
ItemName : Heavy Dudy 316 SS Bimini Top Hinged Jaw Slide w/Boat Pin & Cam Clamp Pair 7/8" (22MM ) by NRX&XRC
ItemPackageDimensions_Height : 16 centimeters
ItemPackageDimensions_Length : 2.79 centimeters
ItemPackageDimensions_Width : 7.87 centimeters
ItemPackageQuantity : 1
ItemShape : Irregular Shape
ItemTypeKeyword : boating-deck-hardware
Manufacturer : NRC&XRC
Material : Stainless Steel
ModelName : FSH39BU
ModelNumber : NRC-WJBP7/8"
NoiseLevel : 112 decibels
NumberOfBoxes : 1
NumberOfItems : 1
PackageLevel : unit
PartNumber : NRC-WJBP7/8"
Pattern : Paracord Zipper Pulls
ProductDescription : This is our 316 stainless steel Bimini Top Hinged jaw slide fitting for 7/8” (22mm)
These are used in a variety of ways.
A couple of the most common is to add a Bimini top to boat rails or to add support arms to an existing top.
This jaw slide has 2 Phillips head bolts to secure it to the rail.
Once the fitting is secured to the rail the distance between the posts will be about ¼” wide, the industry standard.
Hardware and instruction / installation manual not included.
ProductGrade : Replacement Part
ProductSiteLaunchDate : 2019-01-28T07:38:34.050Z
Size : 6 oz
Style : Modern
SupplierDeclaredDgHzRegulation : not_applicable
SupplierDeclaredHasProductIdentifierExemption : 1
UnitCount : 25
UnspscCode : 31162403
Voltage : 12 volts
WarrantyDescription : Warranty