Cart 2 india

Specification
Brand : Generic
BulletPoint1 : Easy Flushing and winterization of marine engines, a/c, and generators
BulletPoint2 : All caps are sold individually, please measure your strainer cap prior to ordering
BulletPoint3 : Works on all Perko model 493 Sea Strainers with 3.5" diameter cap (round edge to round edge)
BulletPoint4 : Come equiped with a garden hose connector for ease and convenience of use
BulletPoint5 : Constructed of pressure molded durable polyurethane and equipped with a chemical resistant silicone gasket
Color : Black
CompatibleWithVehicleType : Watercraft
ExternallyAssignedProductIdentifier1 : 631004090003
ExternallyAssignedProductIdentifier2 : 0631004090003
GpsrSafetyAttestation : 1
ImportDesignation : Made in the USA
IncludedComponents : TACO Marine V11-9960BBK60-2 SuproFlex Rub Rail Kit - 60' x 1-19/32" x 25/32", Black
ItemDisplayDimensions_Height : 6.75 inches
ItemDisplayDimensions_Width : 22.5 inches
ItemName : Perko Sea Strainer Flush Cap (Medium (1"-1.25" Strainers))
ItemPackageDimensions_Height : 4 inches
ItemPackageDimensions_Length : 6 inches
ItemPackageDimensions_Width : 6 inches
ItemPackageQuantity : 1
ItemTypeKeyword : boating-deck-hardware
Manufacturer : JLC-Canvas
Material : Thermoplastic Rubber
ModelName : TACO Marine V11-9960BBK60-2 SuproFlex Rub Rail Kit - 60' x 1-19/32" x 25/32", Black
ModelNumber : PFC
NumberOfItems : 1
NumberOfPieces : 1
PackageLevel : unit
PartNumber : JLC
Pattern : Solid
ProductDescription : Available in three sizes to fit any Perko Model 493 series Sea Strainer. Makes flushing and winterizing your raw water cooled boats easier than ever! These Flush Caps make descaling with Barnacle Buster, fresh water flushing, and winterizing your raw water cooled equipment a breeze! No Need to constantly remove your hoses to gain access to your strainer, as you can simply swap the stock cap for ours and use a standard garden hose to flush or winterize your engines, generator, or air conditioners. Temporarily replacing your strainer cap allows you to effortlessly flush your strainer and adjoining system with minimal effort. These Flush Caps are constructed of a durable, impact resistant, pressure-molded rigid plastic. The 1/2", 3/4", 1", and 1.25" are pressure-molded rigid plastic with a 3/4" NPT thread fitted with a swivel head female garden hose fitting. The 1/2" and 3/4" sized caps are typically used for most marine air conditioning water intakes and generators up to approximately 8KW in size. The 1.25" size is standard on most gas motors up to 8.2 liters in displacement. The gaskets are custom made silicone, and are more chemically resistant than the stock rubber gaskets. The 1.50"-2.50" caps are made with a 316 stainless steel 1.25" Hose barb fitting with the housing threaded in 1" NPT. This is to accommodate the greater water flow requirements of larger diesel powered vessels. These caps can utilize 1.25" ID hose such a standard bilge pump hose which can be economically sourced at your local marine supply or hardware store (Lowe's and Home Depot). Cap sizes are by either strainer model # size, or the internal diameter of the hose connected to your strainer. If you are unsure contact us and we will help determine the correct caps for your boat. Cap colors vary, however whenever possible we will send matching sets when multiple caps are ordered at the same time.
ProductSiteLaunchDate : 2023-05-14T13:39:11.450Z
RequiredProductComplianceCertificate : California Air Review Board (CARB)
Size : Medium (1"-1.25" Strainers) 3.5" Cap Diameter
StreetDate : 2009-02-20T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 40141700
WarrantyDescription : Warranty