Cart 2 india

Specification
Brand : FKG
BulletPoint1 : Quantity: 1000
BulletPoint2 : Diameter: 3/8 Inch (0.375 Inch)
BulletPoint3 : NOT magnetic
BulletPoint4 : Material: Chrome Steel
BulletPoint5 : Static load rating of 2415 newtons and dynamic load rating of 2108 newtons
CustomerPackageType : Standard Packaging
ExternallyAssignedProductIdentifier : 7780931791729
ItemName : FKG 3/8" Inch Bearing Balls 1000 Qty
ItemPackageDimensions_Height : 18.0086 centimeters
ItemPackageDimensions_Length : 6.7056 centimeters
ItemPackageDimensions_Width : 11.5062 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : FKG
Material : Alloy Steel
ModelNumber : a19041900ux0140
NumberOfItems : 1000
PartNumber : FKG 3/8" Inch Bearing Balls 1000 Qty
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.


Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.



Selection Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: R8ZZ
Shield Type: Double Shielded
Inner Race/Outer Race Material: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 1/2" / 12.7mm
Outer Diameter (D): 1-1/8" / 28.575mm
Thickness (B): 5/16" / 7.94mm
Dynamic Load Rating (Cr): 2.108kN
Static Load Rating (Cor): 2.415kN
Accuracy Class: P0 (ABEC-1)
Noise Level: Z1
Number of Pack: 5 Pcs

ProductSiteLaunchDate : 2020-07-23T08:08:32.252Z
Size : 1/2"x1-1/8"x5/16"
SpecificationMet1 : Din 623-1
SpecificationMet2 : Din 620-4
SpecificationMet3 : Iso 281
SpecificationMet4 : Din 625-1
SpecificationMet5 : Iso 286
SpecificationMet6 : Iso 683-17
SpecificationMet7 : Din Iso 281
SpecificationMet8 : En 10139
SpecificationMet9 : Sae J403
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1