Cart 2 india

Specification
Brand : SKF
BulletPoint : Angular Contact Bearings
BulletPoint1 : SKF
BulletPoint2 : Bearing
BulletPoint3 : Quality guaranteed
BulletPoint4 : ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
BulletPoint5 : Number of Pack: 2Pcs
Color : Picture
ExternallyAssignedProductIdentifier : 8306050392150
ExternallyAssignedProductIdentifier1 : 7316577067166
ExternallyAssignedProductIdentifier2 : 07316577067166
GpsrSafetyAttestation : 1
ItemDisplayWeight : 1 kilograms
ItemName : SKF 6007-2RS1 Radial Deep Groove Ball Bearing
ItemPackageDimensions_Height : 7.8 centimeters
ItemPackageDimensions_Length : 2.3 centimeters
ItemPackageDimensions_Width : 6.5 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : SKF
Material : Alloy Steel
ModelNumber : 6007-2RS1
NumberOfItems : 1
PartNumber : 10085873
ProductDescription : Note：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on Both or Single side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.

Description:

Double-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.


Selection Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.

Specification:
Model: 603UU
Shielded Type: Double Shielded
Inner Race/Outer Race Material: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 3mm
Outer Diameter (D): 10mm
Thickness (B): 3mm
Groove width: 1.2mm
Groove depth: 1.1mm
Accuracy Class: P0 (ABEC1)
Noise Level: Z2
Number of Pack: 2Pcs

ProductSiteLaunchDate : 2014-07-25T07:35:22.968Z
Size : One Size
SpecificationMet : DIN 728
StreetDate : 2016-07-29T00:00:01Z
SupplierDeclaredDgHzRegulation : not_applicable
UnitCount : 1
UnspscCode : 25170000