Cart 2 india

Specification
Brand : SKF
BulletPoint1 : Deep-groove geometry for high speeds and supporting both radial and axial loads
BulletPoint2 : Single-row bearing for supporting radial loads
BulletPoint3 : C4 radial internal clearance for radial slack between the inner and outer rings that is greater than CN (normal) and C3 to compensate for thermal expansion
BulletPoint4 : Conforms to ABEC 1 precision standard for performance within a narrow range of variation
BulletPoint5 : Brass cage evenly spaces the balls for even load distribution and prevents contact to reduce friction, vibrations, and noise
Color : Black
ExternallyAssignedProductIdentifier1 : 7316571401102
ExternallyAssignedProductIdentifier2 : 07316571401102
GpsrSafetyAttestation : 1
IncludedComponents : 6000-2RS
ItemName : SKF 6206/C4 Radial Bearing, Single Row, Deep Groove Design, ABEC 1 Precision, Open, C4 Clearance, Standard Cage, 30mm Bore, 62mm OD, 16mm Width
ItemPackageDimensions_Height : 2.286 centimeters
ItemPackageDimensions_Length : 6.35 centimeters
ItemPackageDimensions_Width : 6.35 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : SKF
Material : Brass
Material1 : Plastic
Material2 : Steel
ModelNumber : 6206/C4
NumberOfItems : 1
PartNumber : 6206/C4
ProductDescription : -The finest quality stainless steel produced in accordance with the highest industry standards.
-Precision stainless steel balls are used when conditions require corrosion performance and toughness not available in hardenable stainless steels.
-Stainless steel balls offer the precise geometry and fine surface finish that makes them especially useful in valve pumps, nail polish and spray paint bottles for agitation, sprinkling systems, appliance components, casters, drawer slides, locking mechanisms, semi-precision bearings and a host of other industrial and consumer products.
-Principal applications are in couplings, valves and pumps.

Suitable for a range of purposes, some of the most common are listed below:
-1/8" is often used for clusters and old English-Style headsets
-1/4" is often used for rear wheels and bottom brackets
-3/16" is often used for front wheels
-5/32" is often used for headsets with pressing cups

Specification:
Material: 304 Stainless steel
Precision: G100 (+/-0.005mm)
Diameter: 25mm
Hardness:
ProductSiteLaunchDate : 2012-07-15T08:00:01.000Z
Size : 25mm
SpecificationMet : ISO 9001
Style : 6000-2RS
SupplierDeclaredDgHzRegulation : unknown
UnitCount : 1
UnspscCode : 26111500