Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : 16005ZZ (I.D.=25mm, O.D.=47mm, Thickness=8mm)
BulletPoint2 : 16005zz bearings are shielded on BOTH SIDES to keep lubricant in
BulletPoint3 : Chromium Steel long-life bearings, smooth and low noise
BulletPoint4 : ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
BulletPoint5 : Static load rating of 5600 newtons and dynamic load rating of 8850 newtons
ExternallyAssignedProductIdentifier1 : 748139360533
ExternallyAssignedProductIdentifier2 : 0748139360533
ExternallyAssignedProductIdentifier3 : 00605779603881
ItemName : uxcell 16005ZZ Deep Groove Ball Bearing 25x47x8mm Double Shielded Chrome Steel Bearings 1-Pack
ItemPackageDimensions_Height : 0.39 inches
ItemPackageDimensions_Length : 4.72 inches
ItemPackageDimensions_Width : 3.94 inches
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : steel
ModelNumber : 6203-2RS-16-x2
NumberOfItems : 2
PartNumber : a19010900ux0757
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.


Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.



Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: 16005ZZ
Shield Type: Double Shielded
Inner Race/Outer Race Meterial: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 25mm
Outer Diameter (D): 47mm
Thickness (B): 8mm
Dynamic Load Rating (Cr): 8.85kN
Static Load Rating (Cor): 5.6kN
Accuracy Class: P0 (ABEC-1)
Noise Level: Z1
Number of Pack: 1 Pcs

ProductSiteLaunchDate : 2019-03-14T11:30:37.226Z
Size : 25mmx47mmx8mm
SpecificationMet : Nsk
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 26111500