Cart 2 india

Specification
Brand : uxcell
BulletPoint1 : 16006ZZ (I.D.=30mm, O.D.=55mm, Thickness=9mm)
BulletPoint2 : 16006zz bearings are shielded on BOTH SIDES to keep lubricant in
BulletPoint3 : Chromium Steel long-life bearings, smooth and low noise
BulletPoint4 : ABEC Tolerance 1 (P0), Z1 Noise Level for most general use
BulletPoint5 : Static load rating of 7350 newtons and dynamic load rating of 11200 newtons
ItemName : uxcell 16006ZZ Deep Groove Ball Bearing 30x55x9mm Double Shielded Chrome Steel Bearings 1-Pack
ItemPackageDimensions_Height : 12.7 centimeters
ItemPackageDimensions_Length : 2.54 centimeters
ItemPackageDimensions_Width : 7.874 centimeters
ItemPackageQuantity : 1
ItemTypeKeyword : deep-groove-ball-bearings
Manufacturer : uxcell
Material : Steel
ModelNumber : a19010900ux0756
PartNumber : a19010900ux0756
ProductDescription : NOTE：
Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product.


Description:

Single-row, pre-lubricated, normal accuracy.
Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.
With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.
Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance.
Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on.



Selecting Guide:
Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.
Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings.


Specification:
Model: 16006ZZ
Shield Type: Double Shielded
Inner Race/Outer Race Meterial: Chrome Steel (GCr15)
Cage Material: Stamping Steel
Inner Diameter (d): 30mm
Outer Diameter (D): 55mm
Thickness (B): 9mm
Dynamic Load Rating (Cr): 11.2kN
Static Load Rating (Cor): 7.35kN
Accuracy Class: P0 (ABEC-1)
Noise Level: Z1
Number of Pack: 1 Pcs

ProductSiteLaunchDate : 2019-03-08T08:32:00.192Z
Size : 30mmx55mmx9mm
SupplierDeclaredDgHzRegulation : not_applicable
UnspscCode : 27110000